{"title":"Dental Restoratives","description":"","products":[{"product_id":"gc-gold-label-2-lc-light-cured","title":"GC Gold Label 2 Lc (Light-Cured)","description":"\u003cdiv class=\"product attribute description\"\u003e\n\u003cdiv class=\"value\"\u003e\n\u003cp\u003e\u003cstrong\u003eLight-Cured Reinforced Glass Ionomer Restorative - \u003c\/strong\u003eResin reinforcement and light curing enhances physical and aesthetic properties making Gold Label 2LC one of GC’s top-of-the-line glass ionomer restorative.\u003c\/p\u003e\n\u003cp class=\"gc-product-subline gc-green\"\u003eGC Fuji II LC is the world-wide leading light-cured glass ionomer cement. Although designed primarily as a restorative material for use in Class III, V and deciduous teeth, GC Fuji II LC is a multipurpose material, with secondary indications such as liner, base and core build-up.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA Consistent Predictable Seal: \u003c\/strong\u003e\u003cbr\u003eAll GC Gold Label Glass Ionomer will display a glossy surface after mixing. This indicates sufficient free polyacrylic acid is available to begin the ion exchange process. The subsequent movement of ions between dentin, enamel and GC Glass Ionomer creates an ion exchange zone which chemically fuses them together. The resulting seal is consistent, predictable and long lasting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eINDICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-role=\"content\" class=\"data item content\" id=\"featurestab\"\u003e\n\u003cul\u003e\n\u003cli\u003eClass III and V restorations, particularly for cervical erosions and root surface caries\u003c\/li\u003e\n\u003cli\u003eRestoration of primary teeth\u003c\/li\u003e\n\u003cli\u003eCore build up\u003c\/li\u003e\n\u003cli\u003eCases where radiopacity is required\u003c\/li\u003e\n\u003cli\u003eGeriatric applications\u003c\/li\u003e\n\u003cli\u003eAs a base or liner.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCONTRAINDICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePulp capping\u003c\/li\u003e\n\u003cli\u003eIn rare cases the product may cause sensitivity in some people. If any such reactions are experienced, discontinue the use of the product and refer to a physician\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eADVANTAGES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAllows minimal cavity preparation\u003c\/li\u003e\n\u003cli\u003eLess stress on margins and marginal seal\u003c\/li\u003e\n\u003cli\u003eProtects against secondary caries\u003c\/li\u003e\n\u003cli\u003eExcellent esthetics and finish\u003c\/li\u003e\n\u003cli\u003eImproved abrasion resistance\u003c\/li\u003e\n\u003cli\u003eAllows for immediate finishing after light curing while ensuring total material set\u003c\/li\u003e\n\u003cli\u003eEase of colour match to tooth shade\u003c\/li\u003e\n\u003cli\u003eMore durable, longer lasting restorations\u003c\/li\u003e\n\u003cli\u003eAssurance of successful restorations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSmaller particles\u003c\/li\u003e\n\u003cli\u003eExcellent aesthetics and polishability\u003c\/li\u003e\n\u003cli\u003eHigher filler loading\u003c\/li\u003e\n\u003cli\u003eSignificantly improved abrasion resistance\u003c\/li\u003e\n\u003cli\u003eGood radiopacity\u003c\/li\u003e\n\u003cli\u003eFacilitating post-operative diagnosis\u003c\/li\u003e\n\u003cli\u003eSelf-adhesive to tooth structure\u003c\/li\u003e\n\u003cli\u003eNo etching, no bonding\u003c\/li\u003e\n\u003cli\u003eHydrophilic\u003c\/li\u003e\n\u003cli\u003eVery good results in areas where rubber dam is difficult to use, cavity margins are in dentin and enamel prisms can not be properly etched\u003c\/li\u003e\n\u003cli\u003eSmooth, porosity-free surface after sealing with GC G-Coat Plus\u003c\/li\u003e\n\u003cli\u003ePractical application and manipulation\u003c\/li\u003e\n\u003cli\u003eExcellent aesthetics\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKey Specifications: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTECHNICAL DATA:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePowder \/ Liquid Ratio (g\/g):\u003c\/strong\u003e3.2 \/ 1.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixing Time (sec.):\u003c\/strong\u003e20-25 secs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking Time (min., sec.): \u003c\/strong\u003e3 mins45 secs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Curing Time (sec.):\u003c\/strong\u003e20 secs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth of Cure (A2) (mm):\u003c\/strong\u003e1.8\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGc Gold Label 2 Lc Mini Pack Shade A2:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x 5g Powder\u003c\/li\u003e\n\u003cli\u003e1 x 3g (2.6ml) Liquid\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eGc Gold Label 2 Lc 1-1 Pkg Shade A2:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x 15g Powder\u003c\/li\u003e\n\u003cli\u003e1 x 8g Liquid\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDirection To Use: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1. POWDER AND LIQUID DISPENSING\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ea) Select shade based on Vita shade guide.  : Vita is a registered trademark of Vita Zahnfabrik, Bad Säckingen, Germany\u003c\/p\u003e\n\u003cp\u003eb) The standard powder to liquid ratio is 3.2g \/ 1.0g. 1 level scoop of powder to 2 drops of liquid\u003c\/p\u003e\n\u003cp\u003ec) For accurate dispensing of powder, tap the bottle gently. Do not shake or invert\u003c\/p\u003e\n\u003cp\u003ed) Hold the liquid bottle vertically and squeeze gently\u003c\/p\u003e\n\u003cp\u003ee) Close bottles immediately after use\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2. MIXING\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ea) Fluff powder of bottle before dispensing\u003c\/p\u003e\n\u003cp\u003eb) Place one scoop of powder and two drops of liquid on pad. Divide powder in half\u003c\/p\u003e\n\u003cp\u003ec) Spread liquid out into a thin layer (about the size of a half dollar or 3 cm) with plastic spatula\u003c\/p\u003e\n\u003cp\u003ed) Pull half of the powder onto liquid and mix with lapping strokes (like impression material) for 10 to 15 seconds\u003c\/p\u003e\n\u003cp\u003ee) Pull in remaining powder and mix thoroughly to a glossy consistency. Do not exceed 20-25 second total mixing time\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3. RESTORATIVE TECHNIQUE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ea) Prepare tooth using standard techniques. Extensive mechanical retention is not necessary. For pulp capping use calcium hydroxide\u003c\/p\u003e\n\u003cp\u003eb) Apply GC CAVITY CONDITIONER (10 seconds) or GC DENTIN CONDITIONER (20 seconds) to the bonding surfaces using a cotton pellet or sponge\u003c\/p\u003e\n\u003cp\u003ec) Rinse thoroughly with water. Dry by blotting with a cotton pellet or gently blowing with an air syringe. DO NOT DESICCATE. Best results are obtained when prepared surfaces appear moist (glistening)\u003c\/p\u003e\n\u003cp\u003ed) Mix the required amount of cement. Working time is 3 minutes 45 seconds from the start of mixing at 23°C (73.4°F). Higher temperatures will shorten working time\u003c\/p\u003e\n\u003cp\u003ee) Transfer cement to the preparation using a syringe or suitable placement instrument. Avoid air bubbles\u003c\/p\u003e\n\u003cp\u003ef) Form the contour and place a transparent matrix if required\u003c\/p\u003e\n\u003cp\u003eg) Light cure for 20 seconds using a visible light curing device (470 nm wavelength). Place light source as closely as possible to the cement surface. Note : For cavities deeper than 1.8 mm, use a layering technique\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4. FINISHING\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRemove matrix and finish under water spray using standard techniques. Note : Apply a final coat of GC Fuji VARNISH (blow dry) or GC Fuji COAT LC (light cure for 10 sec.) or G-COAT PLUS (light cure for 20 sec.).\u003c\/p\u003e\n\u003c\/div\u003e","brand":"GC","offers":[{"title":"Mini Pack","offer_id":46991406301359,"sku":"GCGoldLabel2Lc-1","price":31.45,"currency_code":"USD","in_stock":true},{"title":"Big Pack","offer_id":46991406334127,"sku":"GCGoldLabel2Lc-2","price":58.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/9755\/3839\/files\/gc-gold-label-2-lc-_light-cured_-2.webp?v=1771160043"},{"product_id":"gc-g-aenial-anterior","title":"GC G-Aenial Anterior Light Cured, Radiopaque Microfill Hybrid Anterior Composite","description":"\u003cp\u003e\u003cstrong\u003eG-aenial anterior dental composite\u003c\/strong\u003e is the material of choice for dentists seeking an aesthetic restorative that fulfills all patient expectations. This anterior dental composite is a forgiving material that provides beautiful, natural-looking, high-gloss results. It is extremely easy to use, making it ideal for everyday dental procedures. G-aenial anterior dental composite is designed to bring ease and confidence to your restorative work with superior results every time.\u003c\/p\u003e\n\u003cp\u003eThis product features a unique \u003ca href=\"https:\/\/dentistrydeal.com\"\u003ecomposition\u003c\/a\u003e that includes internal reflectivity, accurately replicating natural tooth structure. Its high light scattering properties allow G-ænial to blend seamlessly with the surrounding cavity. The chameleon effect achieved with just one shade is remarkable. Not only does the restoration match the natural tooth, but it also becomes virtually invisible.\u003c\/p\u003e\n\u003cp\u003eDespite the aesthetic invisibility, G-ænial anterior and posterior composites are easily identifiable through X-rays. This is due to the patented GC High-Density Radiopaque (HDR) Technology. This technology boosts radiopacity significantly without sacrificing aesthetics, ensuring easy detection and monitoring of restorations over time. This balance of visual harmony and clinical traceability makes G-aenial anterior a top choice for dental professionals in any dental clinic.\u003c\/p\u003e\n\u003ch2\u003eIndications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDirect restorative for Class III, IV, and V cavities.\u003c\/li\u003e\n\u003cli\u003eRestorative for wedge-shaped defects and root surface cavities.\u003c\/li\u003e\n\u003cli\u003eIdeal for veneers and diastema closure procedures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAdvantages\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNatural reflectivity which creates invisibility in restorations.\u003c\/li\u003e\n\u003cli\u003eForward-thinking shading concept that simplifies the shade selection process.\u003c\/li\u003e\n\u003cli\u003eEasy handling and application for dental practitioners.\u003c\/li\u003e\n\u003cli\u003eExcellent polishability for a smooth and shiny finish.\u003c\/li\u003e\n\u003cli\u003eSimplified follow-ups, enhancing patient care.\u003c\/li\u003e\n\u003cli\u003eTough yet flexible, providing durable restorations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures of anterior dental composite\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimised handling:\u003c\/strong\u003e This anterior dental composite allows total control during sculpting. It is smooth, non-sticky, and easy to shape to the desired form.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShade matching:\u003c\/strong\u003e G-aenial anterior offers simple and easy shade selection. This ensures predictable, natural-looking aesthetics tailored to patient needs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh gloss finish:\u003c\/strong\u003e This composite polishes rapidly to a brilliant, high gloss finish. Diverse filler surfaces increase shine and surface smoothness. For the best polishing, use diamond burs, polishing points, and discs. Applying GC DIA polishing paste at low speed for 15 minutes yields superior luster.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAge aligned shade system:\u003c\/strong\u003e Enamel shade selection is based on the patient's age, improving natural appearance and personalized care.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMore working time:\u003c\/strong\u003e Working time under ambient light is extended to 4 minutes. This reduces stress and allowance for precision during application.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSimplicity:\u003c\/strong\u003e Even in complex restorations, standard shades alone often suffice. This simplicity helps to consistently produce beautiful, natural results.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Specifications\u003c\/h3\u003e\n\u003ch4\u003eIrradiation Time\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlasma arc (2000mW\/cm²):\u003c\/strong\u003e 3 seconds or 6 seconds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGC G-Light (1200mW\/cm²):\u003c\/strong\u003e 10 seconds or 20 seconds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHalogen \/ LED (700mW\/cm²):\u003c\/strong\u003e 20 seconds or 40 seconds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e The depth of curing varies depending on the duration selected for curing the composite. Adequate curing is critical for durability and performance.\u003c\/p\u003e\n\u003ch3\u003ePackaging\u003c\/h3\u003e\n\u003cp\u003eThe product packaging includes clear irradiation timing instructions to help ensure optimal curing:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlasma arc (2000mW\/cm²):\u003c\/strong\u003e 3 seconds or 6 seconds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGC G-Light (1200mW\/cm²):\u003c\/strong\u003e 10 seconds or 20 seconds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHalogen \/ LED (700mW\/cm²):\u003c\/strong\u003e 20 seconds or 40 seconds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Always consider the selected curing time, as it directly influences the depth and effectiveness of composite curing. Follow product instructions carefully for best results.\u003c\/p\u003e\n\u003cp\u003eWhether you are treating patients with dental implants or focusing on veneers, G-aenial anterior dental composite offers reliable, aesthetic results. It is a preferred choice in any dental clinic aiming for superior restorative work. This anterior dental composite combines ease of use and outstanding performance to meet clinician and patient expectations alike.\u003c\/p\u003e","brand":"GC","offers":[{"title":"A2","offer_id":46576579674287,"sku":"GCG-Aenial32","price":55.75,"currency_code":"USD","in_stock":true},{"title":"A3","offer_id":46576579707055,"sku":"GCG-Aenial6","price":55.75,"currency_code":"USD","in_stock":true},{"title":"AO2","offer_id":46576579739823,"sku":"GCG-Aenial5","price":55.75,"currency_code":"USD","in_stock":true},{"title":"B1","offer_id":46576579772591,"sku":"GCG-Aenial31","price":55.75,"currency_code":"USD","in_stock":true},{"title":"XBW","offer_id":46576579805359,"sku":"GCG-Aenial3","price":55.75,"currency_code":"USD","in_stock":true},{"title":"AE","offer_id":46576579838127,"sku":"GCG-Aenial2","price":55.75,"currency_code":"USD","in_stock":true},{"title":"A1","offer_id":46576579870895,"sku":"GCG-Aeniala1","price":55.75,"currency_code":"USD","in_stock":true},{"title":"A3.5","offer_id":46576579903663,"sku":"GCG-Aenial","price":55.75,"currency_code":"USD","in_stock":true},{"title":"TE","offer_id":46576579936431,"sku":"GCG-Aeniala","price":55.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/9755\/3839\/files\/gc_g-_nial_anterior_a1-750x750_1.webp?v=1771509744"},{"product_id":"gc-g-bond-refill","title":"GC G-Bond Refill Light-Cured Adhesive","description":"\u003cp\u003e\u003cstrong\u003eG-BOND\u003c\/strong\u003e is a self-etching light-cured \u003cstrong\u003edental adhesive\u003c\/strong\u003e designed exclusively for dental professionals. It ensures optimal performance in all recommended applications. The product is ideal for bonding light-cured composites, acid-modified composites (compomers), and dual-cured luting or core build-up composites to tooth structures. It must be used only if the composites undergo light curing. Proper use guarantees excellent adhesion and long-lasting results in dental treatments.\u003c\/p\u003e\n\u003cp\u003eThis adhesive has specific contraindications to ensure patient safety. It should not be used for direct pulp capping. Additionally, patients allergic to certain monomers or acetone should avoid this product. Combining G-BOND with chemically cured resins, eugenol-containing materials, or desensitizers is not recommended. Adhering to these precautions ensures safe and effective dental procedures. Many \u003cstrong\u003edental clinic\u003c\/strong\u003e professionals prefer this product for its reliability and ease of use.\u003c\/p\u003e\n\u003ch2\u003eFeatures of the Dental Adhesive\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSelf-etching formula allows for efficient bonding to enamel and dentin.\u003c\/li\u003e\n\u003cli\u003eSpecifically designed for the precise application needs of dental professionals.\u003c\/li\u003e\n\u003cli\u003eVersatile use enables bonding of various composites and compomers with ease.\u003c\/li\u003e\n\u003cli\u003eClear contraindications help maintain safe and targeted product use.\u003c\/li\u003e\n\u003cli\u003eAvoids interference with materials like eugenol and desensitizers, preserving bond strength.\u003c\/li\u003e\n\u003cli\u003eSimple application process with a disposable applicator makes use hygienic and convenient.\u003c\/li\u003e\n\u003cli\u003eLight-cured \u003cstrong\u003edental adhesive\u003c\/strong\u003e allows for a quick and effective curing process.\u003c\/li\u003e\n\u003cli\u003eFlexible storage options include refrigeration for extended shelf life or room temperature storage for short term use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Self-etching light-cured adhesive formulated for dental use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntended Users:\u003c\/strong\u003e Exclusively for experienced dental professionals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBonding Applications:\u003c\/strong\u003e Suitable for light-cured composites, compomers, dual-cured luting, and core build-up composites.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Avoid use with chemically cured resin, eugenol-containing materials, or desensitizers to maintain efficacy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Method:\u003c\/strong\u003e Shake well, dispense a few drops, apply with disposable applicator, and air-dry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCuring Time:\u003c\/strong\u003e Light cure for 10-20 seconds depending on the curing light source.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage:\u003c\/strong\u003e Refrigerate for prolonged periods or store at room temperature for short-term use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackaging\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eContains 1 x 5ml bottle of G-BOND adhesive.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDirections to Use the Dental Adhesive\u003c\/h2\u003e\n\u003ch3\u003eCavity Preparation for Dental Adhesive\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePrepare the tooth using standard dental techniques ensuring clean surfaces.\u003c\/li\u003e\n\u003cli\u003eProtect the working area with a rubber dam to prevent contamination.\u003c\/li\u003e\n\u003cli\u003eDry prepared tooth surfaces by gently blowing with an air syringe for best adhesion.\u003c\/li\u003e\n\u003cli\u003eFor patients requiring direct pulp capping, use calcium hydroxide as recommended.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication Process\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShake the G-BOND bottle thoroughly before dispensing to ensure even consistency.\u003c\/li\u003e\n\u003cli\u003eDispense a few drops into a clean dispensing dish to prevent contamination of the bottle.\u003c\/li\u003e\n\u003cli\u003eReplace the bottle cap immediately after dispensing to maintain product integrity.\u003c\/li\u003e\n\u003cli\u003eApply G-BOND immediately to the prepared enamel and dentin surfaces using the Disposable Applicator II.\u003c\/li\u003e\n\u003cli\u003eAllow the adhesive to remain undisturbed for 5-10 seconds after application to ensure penetration.\u003c\/li\u003e\n\u003cli\u003eDry the area thoroughly for 5 seconds with oil-free air at maximum pressure to eliminate solvent and moisture. Use vacuum suction to control adhesive splatter during this stage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdditional Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIf the G-BOND bottle has been refrigerated for a long time, let it stand at room temperature for a few minutes before use.\u003c\/li\u003e\n\u003cli\u003eNon-cut enamel surfaces should be treated with a 35-40% phosphoric acid gel, rinsed, and gently dried prior to adhesive application.\u003c\/li\u003e\n\u003cli\u003eApply G-BOND promptly as it contains a volatile solvent that evaporates quickly.\u003c\/li\u003e\n\u003cli\u003eRemove excess adhesive on tooth surfaces not intended for bonding using a sponge or cotton pellet immediately after application. Excess cured material is difficult to remove.\u003c\/li\u003e\n\u003cli\u003eIf contamination with water, blood, or saliva occurs before light curing, wash and dry the tooth surface and repeat the application procedure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLight Curing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse a visible light curing unit to cure the adhesive properly.\u003c\/li\u003e\n\u003cli\u003eFor halogen or LED units with a light intensity of 700 mW\/cm², cure for 20 seconds. If the light guide tip is more than 10mm away, curing for 10 seconds is acceptable.\u003c\/li\u003e\n\u003cli\u003eFor high-power LED units exceeding 1200 mW\/cm², cure for 10 seconds, or 5 seconds if the tip is more than 10mm away.\u003c\/li\u003e\n\u003cli\u003eWear appropriate protective light shields or eyewear during the curing process to avoid eye damage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePlacement of Composites\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAfter curing the adhesive, follow the composite resin manufacturer’s instructions carefully.\u003c\/li\u003e\n\u003cli\u003ePlace, contour, and light cure the composite resin material as directed to achieve optimal restoration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFinish and Polishing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOnce the adhesive and composite materials are fully cured, adjust the restoration as needed.\u003c\/li\u003e\n\u003cli\u003ePolish the final restoration using standard dental polishing techniques for a smooth and esthetic finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eG-BOND remains an essential choice among dental professionals, ensuring excellent bonding results in various dental treatments including \u003cstrong\u003edental implants\u003c\/strong\u003e and \u003cstrong\u003eveneers\u003c\/strong\u003e application. Its versatility and reliability have made it a trusted product in leading \u003cstrong\u003edental clinic\u003c\/strong\u003e settings. Employing this \u003cstrong\u003edental adhesive\u003c\/strong\u003e leads to superior clinical outcomes and patient satisfaction.\u003c\/p\u003e","brand":"GC","offers":[{"title":"Default Title","offer_id":46462139695279,"sku":"G-BOND","price":96.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/9755\/3839\/files\/WhatsAppImage2025-08-30at1_1.jpg?v=1779689914"},{"product_id":"gc-gold-label-9-posterior-restorative-gic","title":"GC Gold Label 9 Posterior Restorative GIC","description":"\u003cdiv class=\"product attribute description\"\u003e\n\u003cdiv class=\"value\"\u003e\n\u003cp\u003e\u003cspan\u003eA high strength strontium-based glass ionomer restorative providing all the properties of genuine glass ionomers with physical properties strong enough for use in posterior teeth.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA Strontium-based Glass Ionomer:\u003c\/strong\u003e \u003cbr\u003eAll GC Gold Label Glass Ionomer contains strontium glass. The strontium glass provides good radiopacity and snapset characteristics, unanimously preferred by clinicians around the world. Interestingly, strontium will mimic calcium in the formation of strontium hydroxyapatite and strontium fluoroapatite to affect internal remineralization within the tooth structure.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eINDICATIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv id=\"indicationstab\" class=\"data item content\" data-role=\"content\"\u003e\n\u003cul\u003e\n\u003cli\u003eClass I and small Class II restorations in non-load bearing areas\u003c\/li\u003e\n\u003cli\u003eClass I and Class II restorations in deciduous teeth\u003c\/li\u003e\n\u003cli\u003eTransitional restorations\u003c\/li\u003e\n\u003cli\u003eBase \/ Core build-ups\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"sc-892bc00b-0 sc-1d8c424f-0 cymOrW\"\u003e\n\u003cdiv class=\"sc-eb36be54-0 jrfDqn\"\u003e\n\u003cdiv class=\"sc-eb36be54-2 fPHBZi\"\u003e\n\u003cdiv class=\"sc-1d8c424f-1 haNrmt\"\u003e\n\u003cdiv class=\"sc-892bc00b-0 sc-892bc00b-4 sc-1d8c424f-2 cymOrW kwxfio izBlDE [\u0026amp;_ul]:!list-disc\"\u003e\n\u003cul\u003e\n\u003cli\u003eChemical adhesion to tooth structure allows minimal cavity preparation without the need for etching or bonding agents\u003c\/li\u003e\n\u003cli\u003eA chemical setting without shrinkage allows single-step placement without layering\u003c\/li\u003e\n\u003cli\u003eSimilar thermal expansion as tooth structure produces minimal stress on the marginal seal\u003c\/li\u003e\n\u003cli\u003eStrontium-based glass provides good radiopacity and snap-set characteristics unanimously preferred by clinicians\u003c\/li\u003e\n\u003cli\u003eStrontium based fluoride-releasing formulation contributes to internal remineralization within tooth structure as well as increasing surface strength over time\u003c\/li\u003e\n\u003cli\u003eHigh compressive and flexural strength, and 60% higher wear resistance than conventional glass ionomers make Gold Label 9 strong enough for use in posterior teeth\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKey Specifications: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGold Label IX Extra\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePowder \/ Liquid ratio (g\/g)- 0.40 \/ 0.12\u003c\/li\u003e\n\u003cli\u003eMixing Time(sec.)- 10\u003c\/li\u003e\n\u003cli\u003eWorking Time(min., sec.)- 1.15\u003c\/li\u003e\n\u003cli\u003eNet Setting Time(min., sec.)-2.00\u003c\/li\u003e\n\u003cli\u003eFinal Finishing Commencing Time(37°C, after starting mix)\u003cbr\u003e(min., sec.)- 2.30\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eGold Label IX\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMixing Time(sec.)- 30\u003c\/li\u003e\n\u003cli\u003eWorking Time(min.)-2.0\u003c\/li\u003e\n\u003cli\u003eFinishing begins from the start of the mix(min.)-6\u003c\/li\u003e\n\u003cli\u003ePowder \/ Liquid Ratio (g\/g)- 3.6 \/ 1.0\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGc Gold Label 9 Extra - Big Pkg:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x 15 g Powder\u003c\/li\u003e\n\u003cli\u003e1 x 8 g Liquid(6.4ml)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eGc Gold Label 9 -  Big Pkg:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x 15 g Powder\u003c\/li\u003e\n\u003cli\u003e1 x 13.1 g (10.5mL)Liquid\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eGc Gold Label 9 Extra - Mini Pack:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x 5g Powder\u003c\/li\u003e\n\u003cli\u003e1 x 3g Liquid(2.4ml)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eGc Gold Label 9 - Mini Pack:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x 5 g Powder\u003c\/li\u003e\n\u003cli\u003e1 x 5 g Liquid(4ml)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDirection To Use: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1. POWDER AND LIQUID DISPENSING\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe standard powder-to-liquid ratio is 3.4g\/ 1.0g. (1 level scoop of powder to 1 drop of liquid).\u003c\/li\u003e\n\u003cli\u003eFor accurate dispensing of powder, lightly tap the bottle against the hand. Do not shake or invert.\u003c\/li\u003e\n\u003cli\u003eTo dispense the correct amount of liquid from the bottle turn the bottle upside down, keep the nozzle away from the mixing pad and gently press the bottle. Discard the first 1-2 drops after opening a new bottle as the dispensed amount may not be accurate.\u003c\/li\u003e\n\u003cli\u003eClose bottles tightly immediately after use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e2. MIXING\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDispense powder and liquid onto the pad. Using the plastic spatula, divide the powder into 2 equal parts. Mix the first portion with all the liquid for 10 seconds. Incorporate the remaining portion and mix the whole thoroughly for 15-20 seconds (Fig. 1).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e3. RESTORATIVE TECHNIQUE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrepare the tooth using standard techniques. Extensive mechanical retention is not necessary. For pulp capping, use calcium hydroxide.\u003c\/li\u003e\n\u003cli\u003eApply GC CAVITY CONDITIONER (10 seconds) or GC DENTIN CONDITIONER (20 seconds) to the bonding surfaces using a cotton pellet or sponge (Fig. 2).\u003c\/li\u003e\n\u003cli\u003eRefer to the respective instructions for use.\u003c\/li\u003e\n\u003cli\u003eRinse thoroughly with water. Dry by blotting with a cotton pellet or gently blowing with an air syringe. DO NOT DESICCATE. The best results are obtained when prepared surfaces appear moist (glistening) (Fig. 3).\u003c\/li\u003e\n\u003cli\u003eMix the required amount of GC Gold Label IX GP-EXTRA. Working time is 2 minutes from the start of mixing at 23°C (73.4°F). Higher temperatures will shorten working time.\u003c\/li\u003e\n\u003cli\u003eTransfer cement to the preparation using a syringe or other suitable instrument. Avoid air bubbles.\u003c\/li\u003e\n\u003cli\u003eFrom the preliminary contour and cover with a matrix if required (Fig. 4). g) When set, immediately apply GC Fuji VARNISH (blow dry) or GC Fuji COAT LC (light cure for 10 sec.).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/media.dentalkart.com\/gcextra90.PNG\"\u003e\u003cstrong\u003e4. FINISHING\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFinal finishing under water spray using standard techniques can begin at 6 minutes after starting the mix.\u003c\/li\u003e\n\u003cli\u003eApply a final coat of G-COAT PLUS and light cure for 20 sec. (Fig.5, 6). Alternatively, apply GC Fuji VARNISH (blow dry) or GC Fuji COAT LC (light cure for 10 sec.) \u003c\/li\u003e\n\u003cli\u003eInstruct the patient not to apply pressure for 1 hour.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"GC","offers":[{"title":"Mini Pack","offer_id":46574864531631,"sku":"GCGoldLabel9Mini","price":34.65,"currency_code":"USD","in_stock":true},{"title":"Mini Pack(Extra)","offer_id":46574864564399,"sku":"GCGoldLabel9MiniExtra","price":34.65,"currency_code":"USD","in_stock":true},{"title":"Big Pack","offer_id":46965475016879,"sku":"GCGoldLabel9Big","price":64.65,"currency_code":"USD","in_stock":true},{"title":"Big Pack(Extra)","offer_id":46965475049647,"sku":"GCGoldLabel9BigEXTRA","price":64.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/9755\/3839\/files\/gc.webp?v=1777959007"},{"product_id":"dentsply-integrity-temporary-crown-and-bridge-material","title":"Dentsply Integrity Temporary Crown And Bridge Material","description":"\u003cp\u003e\u003cstrong\u003eDentsply Integrity Temporary Crown and Bridge Material with\u003c\/strong\u003e\u003cspan\u003e Fluorescence is a two-component material designed for creating temporary crowns and bridges. It is an automixed material that consists of multi-functional methacrylic esters. This versatile material can be used for both short-term and long-term temporary restorations. The Integrity Temporary Crown \u0026amp; Bridge Material with Fluorescence offers several benefits. It allows for the fabrication of temporaries that are not only fast and strong but also aesthetically pleasing. The material has a consistent texture with minimal shrinkage, enabling easy handling and reducing the need for adjustments. This feature saves valuable time for dental professionals. The packaging of Integrity Temporary Crown and Bridge Material in a cartridge format serves to simplify delivery and minimize product waste. The indications for using this material include the direct fabrication of temporary restorations such as veneers, inlays, onlays, crowns, and bridges. These temporaries are typically employed in indirect restorative procedures.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\"\u003e\u003cspan\u003ePerfect mix ratio with no cross contamination\u003c\/span\u003e\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\u003cspan\u003eLess than 5° C temperature change in the mouth during setting\u003c\/span\u003e\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\u003cspan\u003eDoes not damage the pulp and offers great patient comfort\u003c\/span\u003e\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\u003cspan\u003eBonds to itself for easy repair\u003c\/span\u003e\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\u003cspan\u003ePolishes to a natural luster for superb results\u003c\/span\u003e\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\u003cspan\u003eGreat consistency for easy handling and cleanup\u003c\/span\u003e\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\u003cspan\u003eGreat esthetics\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKey Specifications: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eImmediately before each use\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Bleed cartridge prior to inserting new mix tip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0-5 seconds\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Material dispensed into preliminary impression\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5-45 seconds -\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eMaterial inserted into the mouth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-3 minutes -\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eRemoval from mouth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 minutes -\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eRemove the O2-inhibited layer and begin to trim the excess with-rotary instruments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e7 minutes -\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eComplete contours and polish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eComposition  \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBarium glass\u003c\/li\u003e\n\u003cli\u003eFumed Silica\u003c\/li\u003e\n\u003cli\u003eMethacrylate Monomers\u003c\/li\u003e\n\u003cli\u003eCatalyst\u003c\/li\u003e\n\u003cli\u003eStabilizers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x 76gm Cartridge\u003c\/li\u003e\n\u003cli\u003e15 x Small Mixing Tips\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDirection To Use: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRaise the release lever vertically upward, while simultaneously pulling the plunger all the wayback in the dispenser handle.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCartridge Loading :\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eOpen cartridge lock by lifting up top clasp.\u003c\/li\u003e\n\u003cli\u003eOrient and insert cartridge with notch facing down.\u003c\/li\u003e\n\u003cli\u003eClose the top clasp to lock cartridge into dispenser gun.\u003c\/li\u003e\n\u003cli\u003eRemove the cartridge cap by turning 90° counterclockwise. Discard the cartridge cap.\u003c\/li\u003e\n\u003cli\u003eThe used mixing tip can be disinfected and left in place until the next use to serve as a self-sealing cap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDispensing :\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDispense and discard a “pea” size amount of base and catalyst before installing mix tip to ensure even flow from cartridge. Use gentle pressure. Be sure no plug is present. If any plug blocks flow, clear with an instrument. Wipe away excess from the cartridge carefully so base and catalyst do not cross contaminate and cause obstruction of the nozzle.\u003c\/li\u003e\n\u003cli\u003eInstall a mixing tip on the cartridge by lining up the notch on the outside rim of the mix tip with the notch on the cartridge flange. If mix tip does not seat easily, be sure the internal end view of the mix tip is aligned correctly. The mix tip itself can turn in its cap.\u003cbr\u003eThe two holes should line up with the piece that is on the outside rim of the mix tip cap to facilitate inserting. Turn tip to align in its cap.\u003c\/li\u003e\n\u003cli\u003eWhen mix tip notch is lined up with the notch on the cartridge flange, turn mix tip cap 90° in a clockwise direction to lock in place on cartridge.\u003c\/li\u003e\n\u003cli\u003eSqueeze dispenser trigger with moderate and even pressure to begin mixing\/dispensing material. Material will stop flowing after trigger is released. Disinfect barrels and used mix tip for storage. Immediately prior to next use, bleed syringe and install new mix tip as outlined above.\u003c\/li\u003e\n\u003cli\u003eTo remove cartridge, push up lever and pull slide flush. Lift plastic lever on the top of gun and remove cartridge.\u003c\/li\u003e\n\u003cli\u003eDispense a small amount through the mix tip onto a mixing pad and discard. Without delay, begin dispensing Integrity Material directly into the preliminary impression into the area of the preparation by applying continuous, light pressure to the dispensing apparatus handle. As the material comes out of the mixing tip, inject it into the deepest portion of the preliminary impression and then into the gingival areas, keeping the mixing tip immersed in the material to prevent bubbles. Reseat the preliminary impression into the patient’s mouth in the proper relative position within 45 seconds of the start of mix.\u003c\/li\u003e\n\u003cli\u003eLeave impression in place for approximately 2-3 minutes from the start of the mix.\u003cbr\u003eRemove the impression containing the Integrity Material restoration during the firm elastic stage.\u003c\/li\u003e\n\u003cli\u003eAt this elastic phase, gross excess may be quickly trimmed with sharp scissors, being careful not to distort the restoration or margins.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dentsply","offers":[{"title":"Default Title","offer_id":46462140612783,"sku":"DentsplyIntegrity","price":148.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/9755\/3839\/files\/dentsply-integrity-temporary-crown-and-bridge-material-2_1.webp?v=1777959106"},{"product_id":"dentsply-intermediate-restorative-material-irm","title":"Dentsply Intermediate Restorative Material (IRM)","description":"\u003cp\u003e\u003cstrong\u003eIRM\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003erestorative is a specially formulated dental material designed for intermediate restorations with a limited lifespan of up to one year. It is composed of a combination of zinc oxide and eugenol, which work together to provide temporary dental restorations. The material is reinforced with polymers to enhance its strength and durability, ensuring reliable performance during the designated period. One of the key applications of IRM restorative is as an intermediate direct restorative filling material. It can be used by dental professionals to restore damaged teeth temporarily, providing functional and aesthetic benefits until a more permanent solution is implemented. Additionally, IRM restorative can serve as a base material under non-resin-containing permanent restorations. This means it provides a stable foundation for restorative materials and cements that do not contain resin components. It should not be used in patients who have a known hypersensitivity or severe allergic reaction to eugenol or any of the other components present in the material. Furthermore, direct pulp-capping, which involves placing the restorative material directly onto exposed dental pulp, should not be performed with IRM restorative. Additionally, it should not be used as a base under resin-containing adhesives, restoratives, or cements. IRM restorative is available in two convenient delivery forms. The powder\/liquid version allows for easy hand mixing, providing flexibility and control during preparation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eINDICATIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\"\u003e\u003cspan\u003eIt is an intermediate restorative material. In a clinical study, it was compared to other ZOE (Zinc Oxide- Eugenol) compositions and an EBA (Eugenol and o-ethoxy benzoic acid) formulation. Result: it was judged superior for both Class I and II restorations ( at one and two-year observations).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\n\u003cspan\u003eAmong the many applications are the restoration of deciduous teeth (when permanent teeth are two years or less from eruption); restorative emergencies; caries management\u003c\/span\u003e\u003cspan\u003e programs\u003c\/span\u003e\u003cspan\u003e; dental school clinics and public health dental programs.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\u003cspan\u003eIt is used as a base under cements and restorative materials that do not contain resin components, such as amalgams, and inlays and Onlays.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCONTRAINDICATIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\"\u003e\u003cspan\u003ePatients who have a known hypersensitivity or severe allergic reaction to eugenol, or any other components.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\u003cspan\u003eDirect pulp capping\u003c\/span\u003e\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\u003cspan\u003eBase under resin-containing adhesives, restoratives or cements.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eADVANTAGES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\"\u003e\u003cspan\u003eThe eugenol content in the polymer-reinforced zinc oxide-eugenol composition gives the material sedative-like qualities on hypersensitive tooth pulp and is a good thermal insulator as well.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\n\u003cspan\u003eOther physical-related clinical advantages include excellent abrasion\u003c\/span\u003e\u003cspan\u003e resistance, good\u003c\/span\u003e\u003cspan\u003e sealing properties and low solubility.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePolymer-Reinforced Composition\u003c\/strong\u003e: IRM restorative is reinforced with polymers, enhancing its strength and durability. This ensures that it can withstand the functional demands of the restored tooth during its temporary placement\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eZinc Oxide-Eugenol Composition:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe combination of zinc oxide and eugenol in IRM® restorative provides several benefits. Zinc oxide contributes to the material's strength and stability, while eugenol offers antibacterial properties and soothing effects on the dental pulp.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand Mixing and Machine Mixing Options\u003c\/strong\u003e: IRM restorative is available in different delivery forms to accommodate dental professionals' preferences.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKey Specifications: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMPOSITION:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePowder;\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eZinc oxide\u003c\/li\u003e\n\u003cli\u003eMagnesium oxide\u003c\/li\u003e\n\u003cli\u003eZinc acetate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLiquid:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEugenol\u003c\/li\u003e\n\u003cli\u003eAcetic acid\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eStorage conditions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStore with original (not dropper cap) caps tightly closed in a well-ventilated place at temperatures between 10 °C and 24 °C (50 °F and 75 °F).\u003c\/li\u003e\n\u003cli\u003eProtect from moisture.\u003c\/li\u003e\n\u003cli\u003eDo not freeze.\u003c\/li\u003e\n\u003cli\u003eDo not use after the expiration date\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Powder Bottle (38g)\u003c\/li\u003e\n\u003cli\u003e1 x Liquid Bottle (14mL)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDirection To Use: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCavity preparation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIsolate the field of operation in a preferred manner. A rubber dam is recommended.\u003c\/li\u003e\n\u003cli\u003eCavity preparation must provide for the mechanical retention of the product.\u003c\/li\u003e\n\u003cli\u003eIf caries are present, completely excavate using low-speed and\/or hand instrumentation.\u003c\/li\u003e\n\u003cli\u003ePlace matrix and wedge where indicated.\u003c\/li\u003e\n\u003cli\u003eGently dry preparation with a cotton pellet. Avoid desiccation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePulp protection\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIn deep cavities cover the dentin close to the pulp (less than 1 mm) with a hard setting calcium hydroxide liner (Dycal calcium hydroxide liner, see complete Instructions for Use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003cstrong\u003eDispensing and mixing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBefore dispensing, fluff powder (tumble the powder bottle) to assure uniform bulk density of contents. Fill the measuring scoop to excess without packing.\u003c\/li\u003e\n\u003cli\u003eLevel scoop with the bottle insert. Dispense two level scoops of powder onto a clean, non-absorbent mixing pad or glass slab. Larger restorations may require additional scoop(s).\u003c\/li\u003e\n\u003cli\u003eUsing the dropper cap, dispense three drops of liquid for two level scoops of powder. After dispensing the liquid, replace the original cap immediately to prevent evaporation and subsequent contamination.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlacement\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMixed material may be carried to the preparation with a suitable placement instrument.  Adapt, contour, and shape with appropriate instruments. Technique Tip: Dipping the instrument into dry powder left on the pad before using to adapt the material will facilitate placement and minimize sticking.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eUse as an intermediate restorative material\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTrim excess material. Material may be smoothed by lightly burnishing. The initial set occurs approximately 5 minutes from the start of mixing. Increased temperature, humidity, and powder\/liquid ratio may accelerate the setting.\u003c\/li\u003e\n\u003cli\u003eUpon set, remove the matrix band if present. Check and adjust occlusion as needed. Additional carving or occlusal adjustment may be accomplished with a round bur. Avoid gouging material with sharp burs at high speed. Additional polishing is not recommended.\u003c\/li\u003e\n\u003cli\u003ePeriodically evaluate the intermediate restoration until the final restoration is indicated.  The intermediate restoration should be removed and the final restoration completed within one year of placement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eUse as a protective base\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe product is a protective base for non-resin-containing restorative material, such as amalgam or gold.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dentsply","offers":[{"title":"Default Title","offer_id":46462141366447,"sku":null,"price":58.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/9755\/3839\/files\/610007_1000x_d3fd30b9-85bc-4223-82ba-1189b2a94827.webp?v=1767718282"},{"product_id":"3m-espe-p-60-micro-hybrid-syr","title":"3m Espe P-60 Micro Hybrid Posterior Syringe","description":"\u003cdiv class=\"sc-892bc00b-0 sc-1d8c424f-0 cymOrW\"\u003e\n\u003cdiv class=\"sc-eb36be54-0 jrfDqn\"\u003e\n\u003cdiv class=\"sc-eb36be54-2 fPHBZi\"\u003e\n\u003cdiv class=\"sc-1d8c424f-1 haNrmt\"\u003e\n\u003cdiv class=\"sc-892bc00b-0 sc-892bc00b-4 sc-1d8c424f-2 cymOrW kwxfio izBlDE [\u0026amp;_ul]:!list-disc\"\u003e\n\u003cdiv class=\"flex-1 overflow-hidden\"\u003e\n\u003cdiv class=\"react-scroll-to-bottom--css-givdb-79elbk h-full dark:bg-gray-800\"\u003e\n\u003cdiv class=\"react-scroll-to-bottom--css-givdb-1n7m0yu\"\u003e\n\u003cdiv class=\"flex flex-col text-sm dark:bg-gray-800\"\u003e\n\u003cdiv data-testid=\"conversation-turn-3\" class=\"group w-full text-token-text-primary border-b border-black\/10 dark:border-gray-900\/50 bg-gray-50 dark:bg-[#444654]\"\u003e\n\u003cdiv class=\"p-4 justify-center text-base md:gap-6 md:py-6 m-auto\"\u003e\n\u003cdiv class=\"flex flex-1 gap-4 text-base mx-auto md:gap-6 md:max-w-2xl lg:max-w-[38rem] xl:max-w-3xl\"\u003e\n\u003cdiv class=\"relative flex w-[calc(100%-50px)] flex-col gap-1 md:gap-3 lg:w-[calc(100%-115px)]\"\u003e\n\u003cdiv class=\"flex flex-grow flex-col gap-3 max-w-full\"\u003e\n\u003cdiv class=\"min-h-[20px] flex flex-col items-start gap-3 overflow-x-auto whitespace-pre-wrap break-words\"\u003e\n\u003cdiv class=\"markdown prose w-full break-words dark:prose-invert light\"\u003e\n\u003cp\u003eThe 3M Espe P-60 Micro Hybrid Posterior Syringe is an advanced dental restorative material engineered to deliver excellent performance and esthetic results for anterior and posterior restorations. Its superb packability facilitates shaping without sticking to instruments. This allows detailed sculpting and precise placement for enhanced outcomes. The material also shows outstanding resistance to slumping, ensuring it maintains form stability during application.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Advantages of the Dental Restorative Material\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis dental restorative material excels in achieving excellent marginal adaptation. It also ensures tight interproximal contacts for reliable restorations. The material integrates perfectly with natural tooth structures, providing durable and visually appealing results. Furthermore, it demonstrates low polymerization shrinkage, which significantly reduces stress on teeth. This effect lowers the chances of patient sensitivity after treatment.\u003c\/p\u003e\n\u003cp\u003eWith outstanding wear resistance and strength, this material offers long-lasting restorations. Dental practitioners can trust that restorations made with this material will endure daily use. The fast placement technique requires only 20 seconds to cure a 2.5mm increment. This accelerates the restoration process for clinicians and patients alike.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVersatile Applications in Dental Clinics\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis dental restorative material suits various dental clinic requirements. It is appropriate for both direct anterior and posterior restorations. Additionally, it supports core build-ups and splinting. Indirect restorations including inlays, onlays, and veneers can also be efficiently handled with this material. Its packaging in a user-friendly syringe makes it easy to deliver precise amounts.\u003c\/p\u003e\n\u003cp\u003eThe 3M Espe P-60 is available in shade options A3 and B2. This helps dental professionals match restorations with natural tooth color. Its versatility makes it a preferred choice for diverse restorative needs involving dental implants and other procedures.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures of This Dental Restorative Material\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExceptional Packability:\u003c\/strong\u003e The material manipulates easily without sticking to instruments, aiding precise sculpting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResistance to Slumping:\u003c\/strong\u003e Maintains shape during application, ensuring accurate placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuperior Marginal Adaptation:\u003c\/strong\u003e Integrates seamlessly with natural tooth structure for a perfect fit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Polymerization Shrinkage:\u003c\/strong\u003e Minimizes tooth stress and reduces patient sensitivity potential.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Wear Resistance:\u003c\/strong\u003e Supports durable and long-lasting restorations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast Placement Technique:\u003c\/strong\u003e Requires only 20 seconds to cure increments of 2.5mm, streamlining the restoration procedure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Usage:\u003c\/strong\u003e Useful for various dental procedures, including splinting, core build-ups, and indirect restorations like veneers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKey Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExcellent Handling for ease of use.\u003c\/li\u003e\n\u003cli\u003eFastest Placement speeds up dental procedures.\u003c\/li\u003e\n\u003cli\u003eLow Shrinkage ensures minimal tooth stress.\u003c\/li\u003e\n\u003cli\u003eExcellent Wear Resistance and tear Strength guarantee durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging and Directions for Use\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe product is packaged as 1 x 4g syringe, designed to offer convenience in handling and storage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePreparation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBegin by preparing the tooth or teeth for restoration following standard dental clinic procedures.\u003c\/li\u003e\n\u003cli\u003eEnsure the tooth is thoroughly cleaned and free of debris before applying the material.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn modern dental clinics, this dental restorative material is a dependable and innovative choice. It combines ease of use, aesthetic quality, and reliable performance. The \u003ca href=\"https:\/\/dentistrydeal.com\/collections\/vendors?q=3M\"\u003e3M Espe\u003c\/a\u003e P-60 supports creating restorations that heal well and appear natural. It stands out as a symbol of 3M’s commitment to advanced dental materials used in treatments involving dental implants and more.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"3M","offers":[{"title":"1 \/ A3","offer_id":46567864467631,"sku":"3MESPEP60-1","price":38.55,"currency_code":"USD","in_stock":true},{"title":"1 \/ B2","offer_id":46937559957679,"sku":"3MESPEP60-2","price":38.55,"currency_code":"USD","in_stock":true},{"title":"5 \/ A3","offer_id":46567864500399,"sku":"3MESPEP60-3","price":185.55,"currency_code":"USD","in_stock":true},{"title":"5 \/ B2","offer_id":46937559990447,"sku":"3MESPEP60-4","price":185.55,"currency_code":"USD","in_stock":true},{"title":"10 \/ A3","offer_id":46567864533167,"sku":"3MESPEP60-5","price":339.55,"currency_code":"USD","in_stock":true},{"title":"10 \/ B2","offer_id":46937560023215,"sku":"3MESPEP60-6","price":339.55,"currency_code":"USD","in_stock":true},{"title":"20 \/ A3","offer_id":46567864565935,"sku":"3MESPEP60-7","price":699.9,"currency_code":"USD","in_stock":true},{"title":"20 \/ B2","offer_id":46937560055983,"sku":"3MESPEP60-8","price":699.55,"currency_code":"USD","in_stock":true},{"title":"50 \/ A3","offer_id":46567864598703,"sku":"3MESPEP60-9","price":1799.85,"currency_code":"USD","in_stock":true},{"title":"50 \/ B2","offer_id":46937560088751,"sku":"3MESPEP60-10","price":1799.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/9755\/3839\/files\/micro_hybrid_1_1.webp?v=1767718390"},{"product_id":"3m-espe-filtek-z250-xt-restorative-syringe","title":"3M ESPE Filtek Z250 XT Universal Restorative Dental Composite Syringe","description":"\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e3M ESPE Filtek Z250 XT Nano Hybrid Restorative Syringe\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eoffers an innovative solution for dental practices seeking reliable and versatile restorative material. Leveraging advanced nanofiller technology, this product combines ease of use with superior aesthetics and durability.v\u003c\/p\u003e\n\u003cp\u003eWith its nanohybrid composition, Filtek Z250 XT addresses the challenges historically associated with traditional hybrids by incorporating nanoparticles that enhance physical properties such as strength, wear resistance, and polish retention. This formulation bridges the gap between large-particle hybrids and true nanocomposites, providing wear resistance similar to microfills while outperforming other hybrids in its class.\u003c\/p\u003e\n\u003cp\u003eOne of the standout features of Filtek Z250 XT is its exceptional handling characteristics, catering to dentists' preferences. The material is designed not to stick to instruments, making adaptation and shaping effortless. It maintains its shape without slumping, allowing seamless blending and feathering. The sculpting process is smooth, ensuring that the material holds its form until curing. Dentists can expect superior handling compared to other nanohybrid composites, streamlining their workflow.\u003c\/p\u003e\n\u003cp\u003eWhen it comes to aesthetics, Filtek Z250 XT excels in meeting patient expectations for natural-looking, high-quality restorations. Available in 12 popular shades that match the Vita Classical Shade Guide, the material seamlessly blends with the patient's natural teeth. This everyday restorative is easy to polish, ensuring a visually pleasing result every time.\u003c\/p\u003e\n\u003cp\u003eFurthermore, Filtek Z250 XT's versatile formulation makes it suitable for both anterior and posterior restorations, accommodating a wide range of clinical needs. Its reliable strength, wear resistance, and surface polishability are made possible by the inclusion of nano-sized particles, ensuring longevity and optimal aesthetics.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy to sculpt and holds its shape prior to cure\u003c\/li\u003e\n\u003cli\u003eHandles better than other nanohybrid composites\u003c\/li\u003e\n\u003cli\u003eDoes not slump \u003c\/li\u003e\n\u003cli\u003eDoes not stick to the composite instruments hence is easy to adapt\u003c\/li\u003e\n\u003cli\u003ePredictable esthetics\u003c\/li\u003e\n\u003cli\u003eHigh stregth \u003c\/li\u003e\n\u003cli\u003eGood wear resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKey Specifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComposition : \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSilane Treated Ceramic\u003c\/li\u003e\n\u003cli\u003e(1-methylethylidene)bis[4,1-phenyleneoxy(2-hydroxy-3,1-propanediyl)]bismethacrylate\u003c\/li\u003e\n\u003cli\u003eBisphenol A Polyethylene Glycol Diether Dimethacrylate (BISEMA-6)\u003c\/li\u003e\n\u003cli\u003eDiurethane Dimethacrylate (UDMA)\u003c\/li\u003e\n\u003cli\u003eSilane Treated Silica\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"sc-892bc00b-0 sc-1d8c424f-0 cymOrW\"\u003e\n\u003cdiv class=\"sc-eb36be54-0 jrfDqn\"\u003e\n\u003cdiv class=\"sc-eb36be54-2 fPHBZi\"\u003e\n\u003cdiv class=\"sc-1d8c424f-1 haNrmt\"\u003e\n\u003cdiv class=\"sc-892bc00b-0 sc-892bc00b-4 sc-1d8c424f-2 cymOrW kwxfio izBlDE [\u0026amp;_ul]:!list-disc\"\u003e\n\u003cul\u003e\n\u003cli\u003e1 x 3gm Syringe \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDirection To Use:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePreparation\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cul\u003e\n\u003cli\u003eClean teeth with pumice and water.\u003c\/li\u003e\n\u003cli\u003eSelect the appropriate shade by evaluating the tooth's gingival, body, and incisal areas.\u003c\/li\u003e\n\u003cli\u003eUse a mock-up to test the shade match.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIsolation\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003eUse a rubber dam or cotton rolls with an evacuator for isolation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirect Restorations\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"list-style-type: none;\"\u003e\n\u003cul\u003e\n\u003cli style=\"list-style-type: none;\"\u003e\n\u003cul\u003e\n\u003cli style=\"list-style-type: none;\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCavity Preparation\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003eClean and round cavity; remove residual materials.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePulp Protection\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003eApply calcium hydroxide and a light-cure glass ionomer liner if needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatrix Placement\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003eUse Mylar strips or matrix bands for anterior and posterior restorations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesive System\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003eFollow instructions for etching, priming, and adhesive application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eDispensing\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor syringes: Turn the handle clockwise to dispense, then counterclockwise to stop flow and cap the syringe.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePlacement\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eApply composite in increments, overfill slightly, and contour with composite instruments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCuring\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCure each increment with a high-intensity light (400 mW\/cm²). Follow recommended exposure times based on shade.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eFinishing\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eContour with fine diamonds or burs. Use finishing strips for proximal surfaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eAdjust Occlusion\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCheck and adjust occlusion with articulating paper and fine diamonds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePolishing\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePolish with the Sof-Lex Finishing and Polishing System.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIndirect Procedure\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eDental Operatory\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShade Selection\u003c\/strong\u003e: Choose the shade before isolation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreparation and Impressioning\u003c\/strong\u003e: Prepare tooth and take an impression.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLaboratory Procedure\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCasting and Trimming\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003ePrepare and trim the cast, apply separating medium.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposite Application\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003ePlace die back into the articulated arch; add and slightly overfill with incisal composite.\u003c\/li\u003e\n\u003cli\u003eLight cure for 10 seconds, then remove die to avoid sticking. Finish curing.\u003c\/li\u003e\n\u003cli\u003eRemove excess composite, develop inclines and ridges.\u003c\/li\u003e\n\u003cli\u003eCarefully remove the prosthesis from the die; ensure clean separation from the cured restoration.\u003c\/li\u003e\n\u003cli\u003eCheck restoration on the master die for fit, flash, and undercuts. Adjust and polish as needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDental Operatory Procedure\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cul\u003e\n\u003cli\u003eRoughen the interior surfaces of the indirect restoration.\u003c\/li\u003e\n\u003cli\u003eClean the prosthesis in a soap solution using an ultrasonic bath and rinse thoroughly.\u003c\/li\u003e\n\u003cli\u003eCement the prosthesis using a 3M ESPE resin cement system, following the manufacturer’s instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"3M","offers":[{"title":"A1","offer_id":46561614364847,"sku":null,"price":19.9,"currency_code":"USD","in_stock":true},{"title":"A2","offer_id":46561614397615,"sku":null,"price":19.9,"currency_code":"USD","in_stock":true},{"title":"A3","offer_id":46561614430383,"sku":null,"price":19.9,"currency_code":"USD","in_stock":true},{"title":"A3.5","offer_id":46561614463151,"sku":null,"price":19.9,"currency_code":"USD","in_stock":true},{"title":"B1","offer_id":46561614495919,"sku":null,"price":19.9,"currency_code":"USD","in_stock":true},{"title":"B2","offer_id":46561614528687,"sku":null,"price":19.9,"currency_code":"USD","in_stock":true},{"title":"A1 A2 A3 A3.5","offer_id":46561614561455,"sku":null,"price":76.8,"currency_code":"USD","in_stock":true},{"title":"A1 A2 A3 A3.5 B1 B2","offer_id":46561614594223,"sku":"z250","price":114.9,"currency_code":"USD","in_stock":true},{"title":"B1 B2","offer_id":46561614626991,"sku":null,"price":38.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/9755\/3839\/files\/filtek_z250_3.webp?v=1767718392"},{"product_id":"woodpecker-led-d-curing-light-unit","title":"Woodpecker LED D Curing Light Unit","description":"\u003cp\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cstrong\u003eWoodpecker LED D Curing Light\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003eUnit is specifically designed for dental applications. It utilizes the principle of ray radiation to rapidly solidify the light-sensitive resin, providing accelerated dental restoration and material solidification for dental whitening procedures. With its advanced technology and functionality, \u003c\/span\u003e\u003cstrong\u003eLED D Curing Light\u003c\/strong\u003e\u003cspan\u003e is a valuable tool in modern dentistry. The \u003c\/span\u003e\u003cstrong\u003eLED D Curing Light\u003c\/strong\u003e\u003cspan\u003e consists of a high-power LED, an optical fiber, and a main unit. It incorporates a digital screen, a time button, and various components to ensure efficient and precise operation during dental procedures.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe primary function of \u003c\/span\u003e\u003cstrong\u003eLED D Curing Light\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003eis to emit high-power blue light, generated by a 3W LED light source, which delivers wavelengths ranging from 420nm to 480nm. This specific wavelength range is ideal for dental applications, enabling effective curing and solidification of dental materials. While using \u003c\/span\u003e\u003cstrong\u003eLED D Curing Light\u003c\/strong\u003e\u003cspan\u003e, it is essential to adhere to certain precautions. Direct eye exposure to the blue light should be avoided, and the light should be aimed straight at the composite resin for optimal solidification. \u003c\/span\u003e\u003cstrong\u003eLED D Curing Light\u003c\/strong\u003e\u003cspan\u003e offers multiple operating modes, including full power, ramping mode, and pulse mode, which can be selected using the mode button. The solidification time can be adjusted using the time button, with options ranging from 5 to 40 seconds. The power button controls the emission of blue light, allowing for precise control during dental procedures.The optical fiber should be sterilized before each use, while other parts can be cleaned using clean water or neutral sterilized liquid. The curing light is equipped with an over-heat protection system, allowing for continuous operation within specified time limits.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"sc-892bc00b-0 sc-1d8c424f-0 ixfvBk\"\u003e\n\u003cdiv class=\"sc-eb36be54-0 fMhODl\"\u003e\n\u003cdiv class=\"sc-eb36be54-2 jyBgyM\"\u003e\n\u003cdiv class=\"sc-1d8c424f-1 ivzsTD\"\u003e\n\u003cdiv class=\"sc-892bc00b-0 sc-892bc00b-4 sc-1d8c424f-2 ixfvBk jwFGYK kWlpcO [\u0026amp;_ul]:!list-disc\"\u003e\n\u003cul\u003e\n\u003cli\u003eWireless\u003c\/li\u003e\n\u003cli\u003eThree working modes:- Full, Ramping, Pulse.\u003c\/li\u003e\n\u003cli\u003eTime setting:- 5s, 10s, 15s, 20s, 25s, 30s, 35s, 40s.\u003c\/li\u003e\n\u003cli\u003eA full charge can be used for over 400 times. (10s\/time)\u003c\/li\u003e\n\u003cli\u003eConstant light intensity, the solidification effect is not affected by the consumption of remaining power.\u003c\/li\u003e\n\u003cli\u003eWith wire or wireless. It can run directly on commercial power supply if the battery runs out.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKey Specifications: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRechargeable Lithium battery:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eICR18490, 3.7V, 1400mAh\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdapter: \u003c\/strong\u003eInput - AC100V-240V 50Hz\/60Hz, Output - DC5.0V\/1A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWavelength:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e420nm-480nm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight intensity:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1000mW\/cm²~1700mW\/cm²\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnvironment temperature: \u003c\/strong\u003e+5°C~+40°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelative humidity:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e30%~75%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAtmosphere pressure:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e70kPa to 106kPa\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x curing light unit\u003c\/li\u003e\n\u003cli\u003e1 x stand\u003c\/li\u003e\n\u003cli\u003e1 x light protector\u003c\/li\u003e\n\u003cli\u003e1 x charger\u003c\/li\u003e\n\u003cli\u003e1 x optic probe\u003c\/li\u003e\n\u003cli\u003e1 x instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFor Woodpecker LED.D Light Probe: \u003c\/strong\u003e\u003ca href=\"https:\/\/www.dentalkart.com\/brands\/woodpecker\/woodpecker-led-d-light-probe.html\"\u003eClick here to buy the Light Cure Probe\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirection To Use: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStart by fully charging the device. Recharge the battery for at least 4 hours before the first-time usage.\u003c\/li\u003e\n\u003cli\u003eFamiliarize yourself with the basic operation techniques and read the instruction manual carefully. Ensure that you have a general knowledge of dental restoration, dental treatment, and dental whitening.\u003c\/li\u003e\n\u003cli\u003eInstall the components of the LED.D curing light as follows:\n\u003cul\u003e\n\u003cli\u003eTake off the red cap from the optical fiber and insert the metal part into the front of the main unit, securely screwing the fiber to the end.\u003c\/li\u003e\n\u003cli\u003eFix the light hood on the bottom of the optical fiber.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eSet the working mode by pressing the mode button on the device. The corresponding indicator will turn on to indicate the selected mode. There are three working modes available:\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cul\u003e\n\u003cli\u003eFull power mode: In this mode, the blue light radiates at full power.\u003c\/li\u003e\n\u003cli\u003eRamping mode: The blue light power gradually increases and reaches its highest power 5 seconds later.\u003c\/li\u003e\n\u003cli\u003ePulse mode: The blue light works in a pulsating pattern.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eSet the solidifying time by pressing the time button on the device. You can choose from 8 different working times: 5, 10, 15, 20, 25, 30, 35, or 40 seconds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cul\u003e\n\u003cli\u003eIf you select 5 seconds, the blue light will shine at a higher intensity (1500mW\/cm² to 1700mW\/cm²).\u003c\/li\u003e\n\u003cli\u003eIf you select 10, 15, 20, 25, 30, 35, or 40 seconds, the blue light will shine at a slightly lower intensity (1000mW\/cm² to 1200mW\/cm²).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eTo start or stop emitting the blue light, aim the optical fiber at the desired position and press the power button on the device.\u003c\/li\u003e\n\u003cli\u003eDuring the operation, you can stop the blue light at any time by pressing the power button.\u003c\/li\u003e\n\u003cli\u003eThe LED.D curing light is equipped with a battery detect circuit. If low power is detected, the indicator on the device will blink, indicating the need for charging. Please charge the device promptly to ensure uninterrupted usage.\u003c\/li\u003e\n\u003cli\u003eAfter use, clean the optical fiber with a calico to remove any remaining resin and maintain its effectiveness.\u003c\/li\u003e\n\u003cli\u003eThe LED.D curing light will automatically turn off if no action occurs within 2 minutes. You can turn it back on by pressing any button.\u003c\/li\u003e\n\u003cli\u003ePlease note that the LED.D curing light emits a high-intensity blue light, so avoid direct irradiation to the eyes. Take precautions to protect the patient's eyes and wear appropriate eye protection when necessary.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Woodpecker","offers":[{"title":"Default Title","offer_id":46510497038511,"sku":null,"price":52.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/9755\/3839\/files\/dzfgrwth4w.webp?v=1769156605"},{"product_id":"sdi-pola-office-plus","title":"SDI Pola Office Plus","description":"\u003cp\u003ePola Office+ is a hydrogen peroxide-based in-office tooth whitening system requiring minimal chair time. It is a neutral pH gel and contains desensitizers to maximize patient comfort. The dual-barrel syringe system mixes as the gel is applied directly to the tooth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eINDICATIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhitening of discolored vital teeth\u003c\/li\u003e\n\u003cli\u003eWhitening of discolored non-vital teeth\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCONTRA-INDICATIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDo not use on pregnant or lactating women\u003c\/li\u003e\n\u003cli\u003eDo not use on children under 14 years of age\u003c\/li\u003e\n\u003cli\u003eDo not use the Gingival Barrier on any persons having known resin allergies\u003c\/li\u003e\n\u003cli\u003eDo not use Pola Office+ on any persons having known peroxides allergies\u003c\/li\u003e\n\u003cli\u003ePola Office+ will not lighten any restorative materials\u003c\/li\u003e\n\u003cli\u003eDo not use on patients with extremely sensitive teeth.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"wpb_single_image wpb_content_element vc_align_left\"\u003e\n\u003cfigure class=\"wpb_wrapper vc_figure\"\u003e\n\u003cdiv class=\"vc_single_image-wrapper   vc_box_border_grey\"\u003e\u003cspan\u003e\u003cimg class=\"vc_single_image-img attachment-full\" src=\"http:\/\/www.sdi.com.au\/WP-ENGINE\/wp-content\/uploads\/2017\/01\/polaoffice9_en.jpg\" alt=\"\" width=\"450\" height=\"156\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"vc_single_image-wrapper   vc_box_border_grey\"\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"vc_single_image-wrapper   vc_box_border_grey\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eThe unique 37% hydrogen peroxide formula ensures fast release of the peroxide ions to begin the bleaching process.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLess chair time means increased patient comfort, satisfaction, improved productivity, and profitability.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNeutral pH gel\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKey Specifications: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eComposition Sdi Pola Office Plus\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e37.5% hydrogen peroxide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMinimal chair time\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMinimal chair time- within 30 mins\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003estorage time\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStore in a cool place (2°-25°C \/ 35°-77°F). For best results, keep\u003cbr\u003erefrigerated.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1 Patient Kit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x 2.8mL Pola Office+ syringes\u003c\/li\u003e\n\u003cli\u003e1 x 1g gingival barrier syringes\u003c\/li\u003e\n\u003cli\u003eAccessories\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e3 Patient Kit:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3 x 2.8 mL syringes of Pola Office+\u003c\/li\u003e\n\u003cli\u003e3 x 1g Gingival Barrier syringes\u003c\/li\u003e\n\u003cli\u003eAccessories\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e","brand":"SDI","offers":[{"title":"Default Title","offer_id":46512872358063,"sku":null,"price":85.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/9755\/3839\/files\/sdzf_1.webp?v=1769241785"},{"product_id":"sdi-riva-silver-gic","title":"SDI Riva Silver GIC","description":"\u003cdiv class=\"sc-892bc00b-0 sc-1d8c424f-0 ixfvBk\"\u003e\n\u003cdiv class=\"sc-eb36be54-0 fMhODl\"\u003e\n\u003cdiv class=\"sc-eb36be54-2 jyBgyM\"\u003e\n\u003cdiv class=\"sc-1d8c424f-1 ivzsTD\"\u003e\n\u003cdiv class=\"sc-892bc00b-0 sc-892bc00b-4 sc-1d8c424f-2 ixfvBk jwFGYK kWlpcO [\u0026amp;_ul]:!list-disc\"\u003e\n\u003cp\u003eRiva Silver is the ideal radiopaque, silver-alloy-reinforced glass ionomer S restorative material. With excellent tooth adhesion, sustained fluoride release and high compressive strength, Riva Silver is useful for a wide range of restorative applications. Shade: light grey.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eINDICATIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSmall class I and II restorations\u003c\/li\u003e\n\u003cli\u003eDeciduous teeth restorations\u003c\/li\u003e\n\u003cli\u003eGeriatric restorations\u003c\/li\u003e\n\u003cli\u003eIntermediate restoratives and base material for class I and II cavities using the sandwich technique\u003c\/li\u003e\n\u003cli\u003eClass V restorations in non-aesthetic situations\u003c\/li\u003e\n\u003cli\u003eCore buildups. - Temporary fillings\u003c\/li\u003e\n\u003cli\u003eRestorations where radiopacity is desirable\u003c\/li\u003e\n\u003cli\u003eRestorative in the field using the ART technique\u003c\/li\u003e\n\u003cli\u003eTemporary endodontic fillings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCONTRAINDICATIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePulp capping\u003c\/li\u003e\n\u003cli\u003eProduct may cause skin irritations to some people. In such cases, discontinue use and seek medical attention.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh fluoride release\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRiva Silver’s free movement of fluoride provides benefits to surrounding and adjacent tooth surfaces. Fluoride is held within the glass matrix without being bound by the structure. If the level outside the matrix is lower, then fluoride ions are released. Conversely, if the fluoride level is higher (eg. from topical fluoride) then fluoride will recharge the glass ionomer matrix. Riva Silver has the ability to be recharged with fluoride from external sources, providing long term protection against recurrent carries. Riva Silver is great for treating high caries-risk patients as part of an overall treatment plan for maximum care.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy handling\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRiva Silver’s condensable nature allows the operator to quickly and easily place the restoration. Riva Silver can be packed using an amalgam condenser.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerfect for non-compliant patients\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRiva Silver is the ideal restorative in situations where patient compliance and moisture control are difficult. Riva Silver is extremely easy and quick to use\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLight colour\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe light grey colour of Riva Silver requires minimal masking when used under aesthetic restorations\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGreat for core buildups\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBefore After Riva Silver is an excellent material for core buildups. Its high early compressive and bond strength properties ensure favourable core buildup conditions\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh radiopacity\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe addition of metal particles into the cement substantially increases radiopacity. Riva Silver is easily differentiated on radiographs from that of tooth structure allowing easy diagnosis of early lesions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo additional mixing step\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe benefits of using Riva Silver capsules are obvious. However, if using the powder \/ liquid system, no separate adding and mixing of alloy into the powder is required. The alloy component of Riva Silver is pre-mixed into the powder bottle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Specifications: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTECHNICAL DATA:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompressive Strength:\u003c\/strong\u003e134 MPa\u003cbr\u003e\u003cstrong\u003eWorking time: \u003c\/strong\u003e1.5mins\u003cbr\u003e\u003cstrong\u003eInitial setting time: \u003c\/strong\u003e3.5mins\u003cbr\u003e\u003cstrong\u003eFinishing time: \u003c\/strong\u003e1min\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSTORAGE AND HANDLING\u003c\/strong\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDo not remove Riva Silver capsules from their foil packets until ready to use\u003c\/li\u003e\n\u003cli\u003eStore at temperatures between 4°C - 20°C (39°F - 68°F) for capsules and 4°C - 30°C (39°F - 86°F) for powder\/liquid kits\u003c\/li\u003e\n\u003cli\u003eUse at room temperature between 20˚C and 25˚C (68F˚ - 77˚F).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePRECAUTIONS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor professional use only.\u003c\/li\u003e\n\u003cli\u003eKeep out of reach of children\u003c\/li\u003e\n\u003cli\u003eDo not use after expiry date\u003c\/li\u003e\n\u003cli\u003eDo not mix powder or liquid with any other brand of glass ionomer products\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSDI Riva Silver Capsules:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e50 x Riva Silver Capsules\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSDI Riva Silver Powder \u0026amp; Liquid Kit:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x 10g (8.9mL) Riva Silver Liquid Bottle\u003c\/li\u003e\n\u003cli\u003e1 x 32g Riva Silver Powder jar\u003c\/li\u003e\n\u003cli\u003eAccessories\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDirection To Use: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"sc-892bc00b-0 sc-1d8c424f-0 ixfvBk\"\u003e\n\u003cdiv class=\"sc-eb36be54-0 fMhODl\"\u003e\n\u003cdiv class=\"sc-eb36be54-2 jyBgyM\"\u003e\n\u003cdiv class=\"sc-1d8c424f-1 ivzsTD\"\u003e\n\u003cdiv class=\"sc-892bc00b-0 sc-892bc00b-4 sc-1d8c424f-2 ixfvBk jwFGYK kWlpcO [\u0026amp;_ul]:!list-disc\"\u003e\n\u003cp\u003e\u003cstrong\u003eA. CAVITY PREPARATION:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1. Clean and isolate tooth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eA conservative cavity should be prepared, employing standard techniques and instruments. Undercuts are not necessary\u003c\/p\u003e\n\u003cp\u003e2. In cases where pulp protection is necessary, use a calcium hydroxide liner\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eB. CONDITIONING \/ ETCHING:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1. Apply Riva Conditioner to the prepared surfaces and leave in cavity for 10 seconds\u003c\/p\u003e\n\u003cp\u003e2. Rinse thoroughly with water\u003c\/p\u003e\n\u003cp\u003e3. Remove excess water. Keep moist. Avoid contamination.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eBe careful not to completely dry the surface. Surface should be glistening.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCAPSULE SYSTEM\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePowder\/Liquid ratio\u003c\/strong\u003e\u003cspan\u003e (g\/g) 0.72\/0.14\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixing time\u003c\/strong\u003e\u003cspan\u003e (min, sec.) 10 seconds\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking time\u003c\/strong\u003e\u003cspan\u003e (min. sec.) 1’30’’\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInitial setting time\u003c\/strong\u003e\u003cspan\u003e (min, sec) 5’00”\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinishing time\u003c\/strong\u003e\u003cspan\u003e @ 37ºC from start of mixing (min, sec) 6’00”\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum delivery\/capsule\u003c\/strong\u003e\u003cspan\u003e 0.15mL\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest conditions:\u003c\/strong\u003e\u003cstrong\u003etemperature\u003c\/strong\u003e\u003cspan\u003e (23 ± 1°C), \u003c\/span\u003e\u003cstrong\u003erelative humidity\u003c\/strong\u003e\u003cspan\u003e (50 ± 10%). ISO 9917-1 (Non translucent radiopaque glass polyalkenoate cement). \u003c\/span\u003e\u003cspan\u003eMinimum net contents per capsule: 0.72g powder and 0.14g (0.12mL) liquid.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e1. Activate the capsule by pushing the plunger until it is flush with the body.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eImportant: Do not click with applicator before you mix.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e2. Immediately place the capsule into the Ultramat 2 amalgamator, or any other suitable mixer, and triturate for 10 seconds\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e3. Immediately remove the capsule and place into the Riva applicator\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e4. Click the trigger of the Riva applicator until glass ionomer paste is seen through the clear nozzle\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e5. Fill Riva Silver into the cavity, being careful not to trap air under the restoration.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e At 23ºC\/74ºF working time will be about 90 seconds (1’30’’) from the start of mixing. In situations above this temperature, working times will shorten. Adhesion strength will decrease if material is manipulated after this time\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e6. Immediately apply Riva Coat to all exposed surfaces of restoration\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e7. Light cure for 10 seconds procedure.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e8. At least 6 minutes after the start of trituration, finish the restoration using standard techniques\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e9. Apply another layer of Riva Coat\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e10. Light cure for 10 seconds\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e11. Instruct patient not to eat for at least one hour after\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003ePOWDER \/ LIQUID SYSTEM MIXING OF LIQUID AND POWDER:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003ePowder-liquid dosage:\u003c\/strong\u003e 1 flat scoop to 1 drop\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003ePowder-liquid ratio:\u003c\/strong\u003e 0.300g\/0.043g (7:1)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eRecommended mixing time:\u003c\/strong\u003e 30 secs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e1. Gently tap Riva Silver powder bottle on the hand\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e2. Dispense one level measure of powder onto the mixing pad\/ glass slab. Replace cap tightly\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e3. Dispense one drop of Riva Silver onto the mixing pad\/glass slab next to the powder. Replace cap tightly\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e4. Divide the powder into two equal parts\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e5. Mix the liquid with one part of the powder for 10 seconds using a plastic spatula, then include the second part and mix for another 15 to 20 seconds.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"SDI","offers":[{"title":"Default Title","offer_id":46512897032367,"sku":null,"price":216.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/9755\/3839\/files\/sdi-riva-silver-powder-liquid.webp?v=1769242148"},{"product_id":"sdi-pola-office-1-patient-kit","title":"Sdi Pola Office 1 Patient Kit","description":"\u003cp\u003ePola Office one patient kit is a hydrogen peroxide based in-office tooth whitening system requiring minimal chair time. It is a neutral pH gel and contains desensitizers to maximize patient comfort.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eB\u003c\/strong\u003e\u003cstrong\u003euilt in desensitizer\u003cbr\u003e\u003c\/strong\u003ePola Office contains potassium nitrate(densensitizing agent). It acts on the nerve endings by blocking the transmission of sensitive nerve impulses and providing a calming effect.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo bleaching light required\u003c\/strong\u003e\u003cbr\u003eNo light is required to accomplish effective results, however any heat emitting curing light will accelerate the bleaching process to achieve results in just 30 minutes. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible gingival barrier\u003cbr\u003e\u003c\/strong\u003ePola Office’s flexible gingival barrier allows for a quick and clean removal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003cstrong\u003eINDICATIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1. Whitening of discoloured vital teeth.\u003c\/p\u003e\n\u003cp\u003e2. Whitening of discoloured non-vital teeth \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e35% Hydrogen peroxide\u003c\/li\u003e\n\u003cli\u003eCan be used with or without a light\u003c\/li\u003e\n\u003cli\u003eMinimal chair time- within 30 mins\u003c\/li\u003e\n\u003cli\u003e1 to 2 patient with single kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKey Specifications: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"vc_single_image-wrapper   vc_box_border_grey\"\u003e\u003cstrong\u003eCOMPOSITION:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"vc_single_image-wrapper   vc_box_border_grey\"\u003e\u003cstrong\u003ePola Office Liquid\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"vc_single_image-wrapper   vc_box_border_grey\"\u003e\n\u003cul\u003e\n\u003cli\u003e35% Hydrogen peroxide\u003c\/li\u003e\n\u003cli\u003e65% Water\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"vc_single_image-wrapper   vc_box_border_grey\"\u003e\u003cstrong\u003ePola Office Powder\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"vc_single_image-wrapper   vc_box_border_grey\"\u003e\n\u003cul\u003e\n\u003cli\u003e73.26% Thickeners\u003c\/li\u003e\n\u003cli\u003e26.2% Catalysts\u003c\/li\u003e\n\u003cli\u003e0.04% Dye\u003c\/li\u003e\n\u003cli\u003e0.5% Desensitizing agents\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"vc_single_image-wrapper   vc_box_border_grey\"\u003e\u003cstrong\u003eGingival Barrier\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"vc_single_image-wrapper   vc_box_border_grey\"\u003e\n\u003cul\u003e\n\u003cli\u003e83.95% Methacrylic ester\u003c\/li\u003e\n\u003cli\u003e16% Silica\u003c\/li\u003e\n\u003cli\u003e0.04% Pigment\u003c\/li\u003e\n\u003cli\u003e0.01% Butylated hydroxytoluene\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 x 0.3g Pola Office Powder Pots\u003c\/li\u003e\n\u003cli\u003e2 x 2mL Pola Office Syringes\u003c\/li\u003e\n\u003cli\u003e1 x 1g Gingival Barrier Syringe\u003c\/li\u003e\n\u003cli\u003eAccessories\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDirection To Use: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eINSTRUCTIONS FOR VITAL TOOTH WHITENING\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1. Determine and record pre-operative shade.\u003c\/p\u003e\n\u003cp\u003e2. Clean teeth with ONLY a flour based pumice\u003c\/p\u003e\n\u003cp\u003e3. Place cheek retractors and then cover exposed lip surface with petroleum gel\u003c\/p\u003e\n\u003cp\u003e4. Dry teeth and apply Gingival Barrier to both arches, slightly overlapping enamel and interproximal spaces\u003c\/p\u003e\n\u003cp\u003e5. Light cure in a fanning motion for 10-20 seconds until Gingival Barrier is cured\u003c\/p\u003e\n\u003cp\u003e6. Open powder pot. Take one Pola Office syringe, firmly attach a tip, and carefully pull back plunger to release pressure\u003c\/p\u003e\n\u003cp\u003e7. Carefully extrude contents of syringe into the pot\u003c\/p\u003e\n\u003cp\u003e8. Immediately mix using a brush applicator until gel is homogeneous\u003c\/p\u003e\n\u003cp\u003e9. Apply a thick layer of gel to all teeth undergoing treatment\u003c\/p\u003e\n\u003cp\u003e10. Leave gel on for 8 minutes (Optional: a curing light may be used at this stage, please refer to light manufacturer’s recommendations)\u003c\/p\u003e\n\u003cp\u003e11. Suction off using a surgical aspirator tip\u003c\/p\u003e\n\u003cp\u003e12.Complete Steps 9-11 three times (optional 4 times).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eOne pot should only be used for 2 applications or within 20 minutes of mixing\u003c\/p\u003e\n\u003cp\u003e13.After the last application, suction all the gel off, then wash and apply suction\u003c\/p\u003e\n\u003cp\u003e14. Remove Gingival Barrier by lifting it from one end.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eINSTRUCTIONS FOR NON-VITAL TOOTH WHITENING:\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e1. Determine and record pre-operative shade.\u003c\/p\u003e\n\u003cp\u003e2. Isolate tooth\/teeth undergoing whitening using a rubber dam. Ensure the dam fits tightly at the cervical margin.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eIf a rubber dam is not used, cover approximately half of the adjacent vital teeth with 3-4mm thick layer of Gingival Barrier to insulate from heat discomfort of the curing light. This is done when one tooth is being whitened non-vitally\u003c\/p\u003e\n\u003cp\u003e3. Open lingual access to pulp chamber and remove all composite, base material and gutta percha 2-3 mm apical to the CE junction. Place a glass ionomer\/zinc phosphate base, at least 1 mm thick to ensure a barrier between the “sealed” root canal and whitening gel\u003c\/p\u003e\n\u003cp\u003e4. Place and light cure a thick layer of Gingival Barrier at the gingiva region of the isolated tooth\u003c\/p\u003e\n\u003cp\u003e5. Mix the Pola Office gel as instructed in steps 6-8 of the vital tooth bleaching instructions\u003c\/p\u003e\n\u003cp\u003e6. Place the Pola Office gel into the opened pulp chamber and onto the labial surface\u003c\/p\u003e\n\u003cp\u003e7. Leave gel on\/in for 8 min (Optional: curing light may be used at this stage, please refer to light manufactures recommendations)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eIf using a curing light and treating inner and outer surfaces, 2 curing lights can be used (one on each side of tooth) to activate Pola Office\u003c\/p\u003e\n\u003cp\u003e8. Suction off the gel\u003c\/p\u003e\n\u003cp\u003e9. Repeat steps 6-8 until desired shade is achieved.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eOne pot should only be used for 2 applications or within 20 minutes of mixing\u003c\/p\u003e\n\u003cp\u003e10.After the last application, suction and wash the gel off.\u003c\/p\u003e\n\u003cp\u003e11. Remove Gingival Barrier and re-seal tooth with appropriate restorative\u003c\/p\u003e\n\u003cp\u003e12. Record the final shade.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e","brand":"SDI","offers":[{"title":"Default Title","offer_id":46520152490159,"sku":null,"price":85.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/9755\/3839\/files\/227-0054-polaoffice_-1patient.webp?v=1769578334"},{"product_id":"sdi-pola-office-plus-1-patient-kit","title":"SDI Pola Office Plus 1 Patient Kit","description":"\u003cp\u003ePola Office+ is a hydrogen peroxide-based in-office tooth whitening system requiring minimal chair time. It is a neutral pH gel and contains desensitizers to maximize patient comfort. The dual-barrel syringe system mixes as the gel is applied directly to the tooth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eINDICATIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhitening of discolored vital teeth\u003c\/li\u003e\n\u003cli\u003eWhitening of discolored non-vital teeth\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCONTRA-INDICATIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDo not use on pregnant or lactating women\u003c\/li\u003e\n\u003cli\u003eDo not use on children under 14 years of age\u003c\/li\u003e\n\u003cli\u003eDo not use the Gingival Barrier on any persons having known resin allergies\u003c\/li\u003e\n\u003cli\u003eDo not use Pola Office+ on any persons having known peroxides allergies\u003c\/li\u003e\n\u003cli\u003ePola Office+ will not lighten any restorative materials\u003c\/li\u003e\n\u003cli\u003eDo not use on patients with extremely sensitive teeth.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"wpb_single_image wpb_content_element vc_align_left\"\u003e\n\u003cfigure class=\"wpb_wrapper vc_figure\"\u003e\n\u003cdiv class=\"vc_single_image-wrapper   vc_box_border_grey\"\u003e\u003cspan\u003e\u003cimg class=\"vc_single_image-img attachment-full\" src=\"http:\/\/www.sdi.com.au\/WP-ENGINE\/wp-content\/uploads\/2017\/01\/polaoffice9_en.jpg\" alt=\"\" width=\"450\" height=\"156\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"vc_single_image-wrapper   vc_box_border_grey\"\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"vc_single_image-wrapper   vc_box_border_grey\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe unique 37% hydrogen peroxide formula ensures the fast release of the peroxide ions to begin the bleaching process.\u003c\/li\u003e\n\u003cli\u003eLess chair time means increased patient comfort, satisfaction, improved productivity, and profitability.\u003c\/li\u003e\n\u003cli\u003eNeutral pH gel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKey Specifications: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComposition Sdi Pola Office Plus\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e37.5% hydrogen peroxide\u003c\/li\u003e\n\u003cli\u003eMinimal chair time- within 30 mins\u003c\/li\u003e\n\u003cli\u003eStore in a cool place (2°-25°C \/ 35°-77°F). For best results, keep\u003cbr\u003erefrigerated.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1 Patient Kit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x 2.8mL Pola Office+ syringes\u003c\/li\u003e\n\u003cli\u003e1 x 1g gingival barrier syringes\u003c\/li\u003e\n\u003cli\u003eAccessories\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDirection To Use: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstructions for vital tooth whitening:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1. Determine and record pre-operative shade.\u003c\/p\u003e\n\u003cp\u003e2. Clean teeth with ONLY a flour based pumice\u003c\/p\u003e\n\u003cp\u003e3. Place cheek retractors and then cover exposed lip surface with petroleum gel\u003c\/p\u003e\n\u003cp\u003e4. Dry teeth and apply Gingival Barrier to both arches, slightly overlapping enamel and interproximal spaces\u003c\/p\u003e\n\u003cp\u003e5. Light cure in a fanning motion for 10-20 seconds until Gingival Barrier is cured\u003c\/p\u003e\n\u003cp\u003e6. Firmly attach a mixing nozzle to the Pola Office+ syringe away from patient. Dispense a small amount of gel on to a mixing pad until a uniform gel is extruded\u003c\/p\u003e\n\u003cp\u003e7. Using the nozzle as a guide, directly apply a thin layer of gel to all teeth undergoing treatment. A thin layer will help prevent the gel from running.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eIt is best not to lift the nozzle when moving from tooth to tooth. Use a continuous motion\u003c\/p\u003e\n\u003cp\u003e8. Leave gel on for 8 minutes (Optional: a curing light may be used at this stage, please refer to light manufacturer’s recommendations)\u003c\/p\u003e\n\u003cp\u003e9. Suction off using a surgical aspirator tip. Note: It is normal for a residue layer of gel to remain on the surface of the teeth\u003c\/p\u003e\n\u003cp\u003e10. Repeat steps 7-9 three times (optional 4 times)\u003c\/p\u003e\n\u003cp\u003e11.After the last application, suction all the gel off, then wash and apply suction\u003c\/p\u003e\n\u003cp\u003e12. Remove Gingival Barrier by lifting it from one end\u003c\/p\u003e\n\u003cp\u003e13. Record the final shade.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTips for non-vital tooth whitening:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1. Isolate tooth effectively\u003c\/p\u003e\n\u003cp\u003e2. Protect oral mucosa to prevent chemical burns\u003c\/p\u003e\n\u003cp\u003e3. Verify adequate endodontic obturation\u003c\/p\u003e\n\u003cp\u003e4. Use protective barrier to prevent peroxide from reaching the periodontal ligament\u003c\/p\u003e\n\u003cp\u003e5. Avoid acid etching as periodontal ligament irritation may result\u003c\/p\u003e\n\u003cp\u003e6. Advise the patient that a whitened non-vital tooth will not look the same as a vital tooth\u003c\/p\u003e\n\u003cp\u003e7. Recall patients periodically to examine the whitened teeth (clinically \u0026amp; radiographically).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstructions for NON-vital tooth whitening:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1. Determine and record pre-operative shade. \u003c\/p\u003e\n\u003cp\u003e2. Isolate tooth\/teeth undergoing whitening using a rubber dam. Ensure the dam fits tightly at the cervical margin.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eIf a rubber dam is not used, cover approximately half of the adjacent vital teeth with 3-4mm thick layer of Gingival Barrier to insulate from heat discomfort of the curing light. This is done when one tooth is being whitened non-vitally\u003c\/p\u003e\n\u003cp\u003e3. Open lingual access to pulp chamber and remove all composite, base material and gutta percha 2-3 mm apical to the CE junction. Place a glass ionomer\/zinc phosphate base, at least 1 mm thick to ensure a barrier between the “sealed” root canal and whitening gel\u003c\/p\u003e\n\u003cp\u003e4. Place the Pola Office+ gel into the opened pulp chamber and onto the labial surface\u003c\/p\u003e\n\u003cp\u003e5. Leave gel on\/in for 8 min (Optional: curing light may be used at this stage, please refer to light manufacturer’s recommendations)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eIf using a curing light and treating inner and outer surfaces, 2 curing lights can be used (one on each side of tooth) to activate Pola Office+\u003c\/p\u003e\n\u003cp\u003e6. Suction off the gel\u003c\/p\u003e\n\u003cp\u003e7. Repeat steps 4-6 until desired shade is achieved\u003c\/p\u003e\n\u003cp\u003e8. After the last application, suction and wash the gel off\u003c\/p\u003e\n\u003cp\u003e9. Record the final shade.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e","brand":"SDI","offers":[{"title":"Default Title","offer_id":46520237818031,"sku":"SDIPP1","price":69.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/9755\/3839\/files\/pola-office-plus_0.webp?v=1769580759"},{"product_id":"sdi-gs-80-dental-amalgam-capsules","title":"Sdi Gs 80 Dental Amalgam Capsules","description":"\u003cp\u003e\u003cspan\u003eThe technically advanced, non-gamma 2 admix amalgam at an affordable price. GS-80’s high strength ensures longevity and patient satisfaction. The alloy to mercury ratio varies between 1\/0.85 and 1\/0.94 depending on the size and setting time, i.e. 45.9% to 48.5% by weight mercury. The compressive strength of GS-80 at 24 hours is 510 MPa, and the dimensional change during hardening is +0.02%.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOptimal handling characteristics\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGS-80’s consistent mix, ease of loading, placement in preparations, condensability, burnishability, quality of interproximal contact, carvability, and setting characteristics ensure the fi nal restorations meet the needs of the operator.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh compressive strength\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGS-80’s high compressive strength minimizes the risk of fracturing the restoration.(1) High compressive strength ensures a tough and durable long lasting restoration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePositive dimensional change\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGS-80’s positive dimensional change ensures excellent sealing qualities at the margins.(1) Negative values can contribute to post operative sensitivity\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCapsule system\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe SDI capsule system is designed to give consistent and accurate mixes every mix.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGreater choice of setting times and larger choice of capsule sizes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe working and setting times allow large restorations to be condensed and carved without diffi culty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Specifications: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMPOSITION:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlloy Particle\u003c\/strong\u003e: Spherical and Lathe Cut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressive strength -1 hour:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e225MPa (32,625psi)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressive strength -24 hours:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e510MPa (73,950psi)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiametral tensile strength -1 hour\u003c\/strong\u003e: 22MPa (3,190psi)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiametral tensile strength -24 hours\u003c\/strong\u003e: 54MPa (7,830psi)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStatic creep -7 days\u003c\/strong\u003e: 0.1%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensional change -24 hours:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e+2µm\/cm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSDI GS 80 - 1\/2 Spill - 50 Capsules:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJar of 50 capsules - one spill 200mg alloy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSDI GS 80 - 1 Spill - 50 Capsules:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan class=\"product-item-name\"\u003eJar of 50 capsules - one spill 400mg alloy\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"product-item-name\"\u003eSDI GS 80 - 2 Spill - 50 Capsules :\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan class=\"product-item-name\"\u003eJar of 50 capsules - one spill 600mg alloy\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"product-item-name\"\u003eDirection To Use; \u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eINSTRUCTIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1. Select the appropriate size capsule according to colour coding\u003c\/p\u003e\n\u003cp\u003e2. With the capsule inverted, SLOWLY press the plunger end of the capsule against a flat surface until the flange of the plunger is flush with the capsule body\u003c\/p\u003e\n\u003cp\u003eTHIS IS MOST IMPORTANT. Initially, resistance will be felt, then suddenly released as the plunger pierces a diaphragm allowing the mercury to enter the mixing chamber\u003c\/p\u003e\n\u003cp\u003e3. Slightly spread the amalgamator clips and carefully insert the capsule. Ensure that the capsule is securely anchored between the clips\u003c\/p\u003e\n\u003cp\u003e4. Select the appropriate mixing time from the suggested mixing times A range of mixing times is given to accommodate mixing variations that can occur due to machine type, age and line voltage. Correctly triturated amalgam will form into a bright homogeneous plastic mass. A hot, shiny, sticky mass indicates over trituration whilst a dull, dry or powdery mass is under triturated\u003c\/p\u003e\n\u003cp\u003e5. After trituration has been completed,\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ecarefully\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eremove the capsule from the clip\u003c\/p\u003e\n\u003cp\u003e6. Tap the base end of the capsule sharply on the bench to ensure that the mixed amalgam is located in the base of the capsule\u003c\/p\u003e\n\u003cp\u003e7. Separate the base from the body and remove the prepared amalgam from the capsule. If the small separating diaphragm has come away from the capsule wall during activation and mixing, it will separate cleanly from the amalgam\u003c\/p\u003e\n\u003cp\u003e8.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eCONDENSATION:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMoisture contamination: If moisture has introduced into the amalgam before it has set, properties such as strength and corrosion resistance may be affected adversely. If the alloy contains zinc, such contamination may result in an excessive expansion (delayed expansion). Whenever it is possible, use a dry field. Insertion of the amalgam should commence immediately after trituration. It is not necessary to express mercury prior to insertion. Traditional condensation techniques are recommended. Pack angles and undercuts with a small-faced plugger, using sufficient pressure to ensure good adaptation. Build the restoration with additional portions until cavity is slightly over filled. Remove any mercury rich amalgam from the surface, that may develop during condensation\u003c\/p\u003e\n\u003cp\u003e9.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eFINISHING:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eTrimming and carving can be commenced immediately condensation has been completed. Light burnishing can be used to advantage and if the restoration is polished, this procedure should be carried out after 24 hours. Avoid overheating by ensuring adequate water cooling and low speed polishing.\u003c\/p\u003e","brand":"SDI","offers":[{"title":"Default Title","offer_id":46520316231855,"sku":null,"price":78.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/9755\/3839\/files\/amalgam_gs-80_1spill_50kaps.webp?v=1769581554"},{"product_id":"sdi-pola-office-bleaching-kit","title":"SDI Pola Office Bleaching Kit","description":"\u003cp\u003ePola Office is a hydrogen peroxide based in-office tooth whitening system requiring minimal chair time. It is a neutral pH gel and contains desensitizers to maximize patient comfort.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eB\u003c\/strong\u003e\u003cstrong\u003euilt in desensitizer\u003cbr\u003e\u003c\/strong\u003ePola Office contains potassium nitrate(densensitizing agent). It acts on the nerve endings by blocking the transmission of sensitive nerve impulses and providing a calming effect.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo bleaching light required\u003c\/strong\u003e\u003cbr\u003eNo light is required to accomplish effective results, however any heat emitting curing light will accelerate the bleaching process to achieve results in just 30 minutes. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlexible gingival barrier\u003cbr\u003e\u003c\/strong\u003ePola Office’s flexible gingival barrier allows for a quick and clean removal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e35% Hydrogen peroxide\u003c\/li\u003e\n\u003cli\u003eCan be used with or without a light\u003c\/li\u003e\n\u003cli\u003eMinimal chair time- within 30 mins\u003c\/li\u003e\n\u003cli\u003e1 to 2 patient with single kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKey Specificatioins:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMPOSITION:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"wpb_single_image wpb_content_element vc_align_left\"\u003e\n\u003cfigure class=\"wpb_wrapper vc_figure\"\u003e\n\u003cdiv class=\"vc_single_image-wrapper   vc_box_border_grey\"\u003e \u003cstrong\u003ePola Office Liquid\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"vc_single_image-wrapper   vc_box_border_grey\"\u003e\n\u003cul\u003e\n\u003cli\u003e35% Hydrogen peroxide\u003c\/li\u003e\n\u003cli\u003e65% Water\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003ePola Office Powder\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"vc_single_image-wrapper   vc_box_border_grey\"\u003e\n\u003cul\u003e\n\u003cli\u003e73.26% Thickeners\u003c\/li\u003e\n\u003cli\u003e26.2% Catalysts\u003c\/li\u003e\n\u003cli\u003e0.04% Dye\u003c\/li\u003e\n\u003cli\u003e0.5% Desensitizing agents\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"vc_single_image-wrapper   vc_box_border_grey\"\u003e\u003cstrong\u003eGingival Barrier\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"vc_single_image-wrapper   vc_box_border_grey\"\u003e\n\u003cul\u003e\n\u003cli\u003e83.95% Methacrylic ester\u003c\/li\u003e\n\u003cli\u003e16% Silica\u003c\/li\u003e\n\u003cli\u003e0.04% Pigment\u003c\/li\u003e\n\u003cli\u003e0.01% Butylated hydroxytoluene\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eINDICATIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"vc_single_image-wrapper   vc_box_border_grey\"\u003e1. Whitening of discolored vital teeth.\u003c\/div\u003e\n\u003cdiv class=\"vc_single_image-wrapper   vc_box_border_grey\"\u003e2. Whitening of discolored non-vital teeth \u003c\/div\u003e\n\u003cdiv class=\"vc_single_image-wrapper   vc_box_border_grey\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"vc_single_image-wrapper   vc_box_border_grey\"\u003e\u003cstrong\u003ePackaging: \u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"vc_single_image-wrapper   vc_box_border_grey\"\u003e\n\u003cp\u003e\u003cstrong\u003eSdi Pola Office 1 Patient Kit:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 x 0.3g Pola Office Powder Pots\u003c\/li\u003e\n\u003cli\u003e2 x 2mL Pola Office Syringes\u003c\/li\u003e\n\u003cli\u003e1 x 1g Gingival Barrier Syringe\u003c\/li\u003e\n\u003cli\u003eAccessories\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSdi Pola Office 3 Patient Kit:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e6 x 0.3g polaoffice Powder Pots\u003c\/li\u003e\n\u003cli\u003e6 x 2mL polaoffice Syringes\u003c\/li\u003e\n\u003cli\u003e3 x 1g Gingival Barrier Syringes\u003c\/li\u003e\n\u003cli\u003eAccessories\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e Sdi Pola Office Bulk Kit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x 3g pola office powder jar\u003c\/li\u003e\n\u003cli\u003e1 x 20ml polaoffice liquid bottle\u003c\/li\u003e\n\u003cli\u003e3 x 1g Gingvial Barrier syringe\u003c\/li\u003e\n\u003cli\u003eAccessories\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDirection To Use:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eINSTRUCTIONS FOR VITAL TOOTH WHITENING\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1. Determine and record pre-operative shade.\u003c\/p\u003e\n\u003cp\u003e2. Clean teeth with ONLY a flour-based pumice\u003c\/p\u003e\n\u003cp\u003e3. Place cheek retractors and then cover exposed lip surface with petroleum gel\u003c\/p\u003e\n\u003cp\u003e4. Dry teeth and apply Gingival Barrier to both arches, slightly overlapping enamel and interproximal spaces\u003c\/p\u003e\n\u003cp\u003e5. Light cure in a fanning motion for 10-20 seconds until Gingival Barrier is cured\u003c\/p\u003e\n\u003cp\u003e6. Open powder pot. Take one Pola Office syringe, firmly attach a tip, and carefully pull back the plunger to release pressure\u003c\/p\u003e\n\u003cp\u003e7. Carefully extrude contents of the syringe into the pot\u003c\/p\u003e\n\u003cp\u003e8. Immediately mix using a brush applicator until the gel is homogeneous\u003c\/p\u003e\n\u003cp\u003e9. Apply a thick layer of gel to all teeth undergoing treatment\u003c\/p\u003e\n\u003cp\u003e10. Leave the gel on for 8 minutes (Optional: a curing light may be used at this stage, please refer to light manufacturer’s recommendations)\u003c\/p\u003e\n\u003cp\u003e11. Suction off using a surgical aspirator tip\u003c\/p\u003e\n\u003cp\u003e12. Complete Steps 9-11 three times (optional 4 times).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eOne-pot should only be used for 2 applications or within 20 minutes of mixing\u003c\/p\u003e\n\u003cp\u003e13. After the last application, suction all the gel off, then wash and apply suction\u003c\/p\u003e\n\u003cp\u003e14. Remove Gingival Barrier by lifting it from one end.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eINSTRUCTIONS FOR NON-VITAL TOOTH WHITENING:\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e1. Determine and record pre-operative shade.\u003c\/p\u003e\n\u003cp\u003e2. Isolate tooth\/teeth undergoing whitening using a rubber dam. Ensure the dam fits tightly at the cervical margin.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eIf a rubber dam is not used, cover approximately half of the adjacent vital teeth with a 3-4mm thick layer of Gingival Barrier to insulate from heat discomfort of the curing light. This is done when one tooth is being whitened non-vitally\u003c\/p\u003e\n\u003cp\u003e3. Open lingual access to the pulp chamber and remove all-composite, base material, and gutta-percha 2-3 mm apical to the CE junction. Place a glass ionomer\/zinc phosphate base, at least 1 mm thick to ensure a barrier between the “sealed” root canal and whitening gel\u003c\/p\u003e\n\u003cp\u003e4. Place and light cure a thick layer of Gingival Barrier at the gingiva region of the isolated tooth\u003c\/p\u003e\n\u003cp\u003e5. Mix the Pola Office gel as instructed in steps 6-8 of the vital tooth bleaching instructions\u003c\/p\u003e\n\u003cp\u003e6. Place the Pola Office gel into the opened pulp chamber and onto the labial surface\u003c\/p\u003e\n\u003cp\u003e7. Leave the gel on\/in for 8 min (Optional: curing light may be used at this stage, please refer to light manufactures recommendations)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eIf using a curing light and treating inner and outer surfaces, 2 curing lights can be used (one on each side of the tooth) to activate Pola Office\u003c\/p\u003e\n\u003cp\u003e8. Suction off the gel\u003c\/p\u003e\n\u003cp\u003e9. Repeat steps 6-8 until desired shade is achieved.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eOne-pot should only be used for 2 applications or within 20 minutes of mixing\u003c\/p\u003e\n\u003cp\u003e10. After the last application, suction and wash the gel off.\u003c\/p\u003e\n\u003cp\u003e11. Remove Gingival Barrier and re-seal tooth with appropriate restorative\u003c\/p\u003e\n\u003cp\u003e12. Record the final shade.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"vc_single_image-img attachment-full\" src=\"http:\/\/www.sdi.com.au\/WP-ENGINE\/wp-content\/uploads\/2017\/01\/polaoffice9_en.jpg\" alt=\"\" width=\"450\" height=\"156\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/figure\u003e\n\u003c\/div\u003e","brand":"SDI","offers":[{"title":"Default Title","offer_id":46520352309423,"sku":null,"price":88.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/9755\/3839\/files\/thumbnail_1_1.webp?v=1769582007"},{"product_id":"sdi-stae-bond-5ml","title":"SDI Stae Bond 5ml","description":"\u003cp\u003eStae is a fluoride releasing single component dentin \/ enamel total - etch adhesive system, designed for direct bonding. Stae completely and homogeneously infiltrates the hybrid layer to ensure superior bonding to the tooth.\u003cbr\u003e\u003cstrong\u003eINDICATIONS:\u003cbr\u003e\u003c\/strong\u003eI) All direct restorative composites\u003c\/p\u003e\n\u003cp\u003eII) Compomers III) Composite \/ Ceramic+ \/ Metal+ \/ Porcelain+ repairs. + Bonding surface requires pre-treatment with a silane primer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCONTRAINDICATIONS:\u003cbr\u003e\u003c\/strong\u003eI) Not to be used in combination with chemically-cured composite resin\u003c\/p\u003e\n\u003cp\u003eII) Do not use for pulp capping\u003c\/p\u003e\n\u003cp\u003eIII) Any persons having known resin allergies should refrain from using Stae\u003c\/p\u003e\n\u003cp\u003eIV) Not to be used in combination with eugenol materials or hemostatics containing ferric compounds\u003c\/p\u003e\n\u003cp\u003eV) Not to be used in combination with desensitising agents.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOne bottle system\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eStae combines both primer and adhesive in one bottle to simplify the technique and decrease patient chair time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFluoride release\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFluoride’s cariostatic effect enhances remineralization and inhibits enamel demineralization. In an aqueous environment, the fl uoride ions in Stae diffuse from the resin into the surrounding tooth. This ionic movement is caused by oral fl uid passing in and out of the resin and tooth, acting as a carrier for the fl uoride ions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNon Bis-phenol A\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eStae avoids the Bis-phenol A hormonal imbalance controversy, as it does not contain the related BisGMA resin.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBonds to moist and dry tooth surfaces\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eStae’s carrier solvent is a mixture of acetone and water. The acetone carries Stae deep into the demineralized dentin and the water re-moistens any dry dentin.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh bond strength\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eStae’s complete hybridization of the resin into the demineralized dentin results in high bond strength.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Specifications: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMPOSITION:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAcrylic monomer Acetone Fluoride Stabilizer\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"sc-892bc00b-0 sc-1d8c424f-0 ixfvBk\"\u003e\n\u003cdiv class=\"sc-eb36be54-0 fMhODl\"\u003e\n\u003cdiv class=\"sc-eb36be54-2 jyBgyM\"\u003e\n\u003cdiv class=\"sc-1d8c424f-1 ivzsTD\"\u003e\n\u003cdiv class=\"sc-892bc00b-0 sc-892bc00b-4 sc-1d8c424f-2 ixfvBk jwFGYK kWlpcO [\u0026amp;_ul]:!list-disc\"\u003e\n\u003cul\u003e\n\u003cli\u003e1 x 5ml Stae bottle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDirection To Use: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1. Clean and isolate tooth. Rubber dam is the preferred mode of isolation\u003c\/p\u003e\n\u003cp\u003e2. Prepare a conservative cavity, employing standard techniques\u003c\/p\u003e\n\u003cp\u003e3. Use a calcium hydroxide liner and appropriate glass ionomer cement liner to protect deep cavity preparations in close proximity to the pulp\u003c\/p\u003e\n\u003cp\u003e4. Thoroughly dry the bonding surfaces of the tooth with dry, oil-free air\u003c\/p\u003e\n\u003cp\u003e5. Etch with Super Etch 37% phosphoric acid (SDI Limited) for at least 20 seconds.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEnamel subjected to fluoridation should be etched for 90 to 120 seconds.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e If using an etch syringe, ensure that the dispensing tip hub is firmly attached to the syringe by twisting the hub securely onto the syringe. On first usage or after prolonged storage, extrude a small amount onto a mixing pad for familiarity with the etchant’s viscosity and rate of extrusion. 6. Wash thoroughly with water.\u003c\/p\u003e\n\u003cp\u003e7. Remove excess water. Keep moist. Avoid contamination e.g. saliva.\u003c\/p\u003e\n\u003cp\u003e8. Apply Stae to saturate all internal surfaces\u003c\/p\u003e\n\u003cp\u003e9. Blow gently with dry, oil-free air to evaporate solvent. Leave surface glossy\u003c\/p\u003e\n\u003cp\u003e10. Light cure for 10 seconds.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003edo not polymerize Stae by itself in a mixing well; it will be a non – polymerized looking material. Stae contains a unique hydrophobic and hydrophilic monomer that does not cure when exposed to oxygen. The product will polymerize once covered by any lightcure composite restorative material\u003c\/p\u003e\n\u003cp\u003e11. Place composite in increments of 2mm or less.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"SDI","offers":[{"title":"Default Title","offer_id":46520394383535,"sku":null,"price":35.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/9755\/3839\/files\/stae.webp?v=1769582542"},{"product_id":"sdi-set-pp-resin-cement","title":"SDI Set PP Resin Cement","description":"\u003cp\u003eSet PP is a fluoride-releasing self-etching, self-adhesive dual-cure resin cement in a paste\/paste system. ‘seT PP’ is designed for the cementation of indirect ceramic, metal or composite inlays, onlays, crowns, bridges, posts, screws, and veneers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eINDICATIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCeramic, metal, or composite inlays, onlays, crowns, bridges, posts, and screws\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCONTRA-INDICATIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProduct may cause skin irritations to some people. In such cases, discontinue use and seek medical attention.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh fluoride release\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSeT’s free movement of fluoride provides benefits to the tooth. Fluoride plays several significant roles in any caries-prevention program. These include the formation of fluorapatite, which is more acid-resistant than hydroxyapatite. Fluorapatite is harder than other tooth minerals. It helps to provide protection from tooth decay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFast and easy\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSeT is an all-in-one luting cement. It etches, bonds, and fills with just one component. Simply apply seT and seat your restoration. seT produces a low film thickness and fluidity to seat cemented restorations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRadiopacity\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDetectable on x-ray radiographs, seT is great for recalls when margins are regularly checked for integrity\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMinimal to no postoperative sensitivity\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSeT does not require separate etching and washing. The smear layer remains intact to protect the tooth. This dramatically reduces, if not eliminates, post-operative sensitivity\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoice of delivery tips\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSeT PP syringes can be adapted for a variety of delivery options. The regular mixing tips are predominantly used for dispensing into crown and bridge. In conjunction with a wide mixing tip, endodontic and intraoral tips are also available.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDual cure\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned to combine the advantages of light curing and self-curing, seT is the ideal luting cement for most of your cementation needs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo Bisphenol A or HEMA\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSeT does not contain any Bisphenol A (including its derivatives) or HEMA. Use this product on your patients with confidence and peace of mind.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Specifications: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMPOSITION:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e35% by weight methacrylate ester. 65% by weight inorganic filler.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTECHNICAL DATA:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking time at room temperature:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e2 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet setting time at oral temperature:\u003c\/strong\u003e 5 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight-curing time:\u003c\/strong\u003e 20 seconds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSDI SeT PP Syringe Shade A2\/Translucent:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x 7g Syringe\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSDI SeT PP 50 Capsules Shade A2:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e50 Capsules of A2 Shade\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDirection To Use: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eINSTRUCTIONS FOR USE:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTOOTH PREPARATION:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1. Select the appropriate shade of ‘seT PP’\u003c\/p\u003e\n\u003cp\u003e2. Remove the temporary restoration and clean the preparation thoroughly using an oil free pumice to remove any remaining temporary cement\u003c\/p\u003e\n\u003cp\u003e(NOTE: temporary restoration should only be seated with eugenol-free cement)\u003c\/p\u003e\n\u003cp\u003e3. Try in the restoration\u003c\/p\u003e\n\u003cp\u003e4. Again, clean with water and dry, but DO NOT DESICCATE.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eIn cases where pulp protection is necessary, use a hard setting calcium hydroxide liner before the final impression is made. Substances such as hydrogen peroxide, desensitizers, disinfectants, astringents and dentin sealants etc should not be used as residues may interfere with bond strength and setting reactions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRESTORATION PREPARATION:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eClean thoroughly and prepare the restoration according to manufacturer’s instructions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePREPARATION OF SYRINGE:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRemove cap. Dispense 2-3mm of material onto a pad and discard (to ensure correct ratio of extrusion). Attach a mixing tip to the syringe\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMIXING BY HAND:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWithout mixing tip attached, extrude even amount of material onto mixing pad. With a suitable spatula mix the two pastes together for 30 seconds\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAPPLICATION of ‘seT PP’\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1. Protect the work area against contamination from intra-oral fluids\u003c\/p\u003e\n\u003cp\u003e2. Place or extrude ‘seT PP’ evenly onto all bonding surfaces of the restoration and tooth.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eDo not use Lentulo-Spirals to insert the cement into root canals, as this can excessively accelerate setting. Also to avoid entrapping air, vibrate posts while inserting into root canal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eIn the case of veneers, use an adhesive (Go!, Stae, etc according to manufacturer’s instructions including any etching procedure) prior to seT PP to improve the retentive strength. Cement only 1-2 veneers at a time due to limitation of the paste’s working time.\u003c\/p\u003e\n\u003cp\u003e3. Seat restoration, and leave for 30 seconds before any light curing is carried out\u003c\/p\u003e\n\u003cp\u003e4. Trim excess material away after light curing for 2 seconds or after 2 minutes from start of mixing\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eIf excess cement is removed with a sponge pellet or a similar implement leave a minimal amount of excess after restoration is seated. Immediately after, either briefly light-cure the excess or if allowing to self-cure cover the excess with glycerine gel to prevent oxygen inhibition\u003c\/p\u003e\n\u003cp\u003e5. Light cure thoroughly to speed up setting process (minimum 20 seconds per surface). In the case of composite and all ceramic materials, light cure ‘seT PP’ through the restoration\u003c\/p\u003e\n\u003cp\u003e6. Polish marginal area\u003c\/p\u003e","brand":"SDI","offers":[{"title":"Default Title","offer_id":46520515756207,"sku":null,"price":102.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/9755\/3839\/files\/2885-8805001_l.webp?v=1769584134"},{"product_id":"sdi-polanight-bleaching-kit","title":"SDI PolaNight Bleaching Kit","description":"\u003cp\u003ePola Night are high viscosity, neutral pH tooth whitening gels. Both are pleasantly flavored, crystal clear sustained release gels with a unique blend of soothers, conditioners and a water content high enough to further reduce sensitivity\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eINDICATIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhitening of discoloured vital teeth\u003c\/li\u003e\n\u003cli\u003eWhitening of discoloured non-vital teeth\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHYDROGEN PEROXIDE EQUIVALENT:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePola Night 10% Carbamide Peroxide = 3.3% Hydrogen Peroxide\u003c\/li\u003e\n\u003cli\u003ePola Night 16% Carbamide Peroxide = 5.3% Hydrogen Peroxide\u003c\/li\u003e\n\u003cli\u003ePola Night 18% Carbamide Peroxide = 6% Hydrogen Peroxide\u003c\/li\u003e\n\u003cli\u003ePola Night 22% Carbamide Peroxide = 7.3% Hydrogen Peroxide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKey Specifications: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMPOSITION:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e10.0-22.0% wt Carbamide peroxide\u003c\/li\u003e\n\u003cli\u003e\u0026lt; 40% wt Additives\u003c\/li\u003e\n\u003cli\u003e30% wt Glycerol\u003c\/li\u003e\n\u003cli\u003e20% wt Water\u003c\/li\u003e\n\u003cli\u003e0.1% wt Flavour\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSTORAGE AND HANDLING:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eStore in cool place (2°-25°C \/ 35°-77°F). Do not use after expiration date.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePRECAUTIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIrritant\u003c\/li\u003e\n\u003cli\u003eAvoid contact with eyes or gums\u003c\/li\u003e\n\u003cli\u003eAvoid swallowing\u003c\/li\u003e\n\u003cli\u003eTo be used under the supervision of a dental professional\u003c\/li\u003e\n\u003cli\u003eKeep out of reach of children and pets. Not to be used by pregnant or lactating women or children under 14 years old\u003c\/li\u003e\n\u003cli\u003ePatients with a history of chemical allergies are advised to carry out allergy testing by a specialist before using these products\u003c\/li\u003e\n\u003cli\u003eDiscontinue use if any unusual sensitivity or reactions occur and consult your dentist. Do not inject Pola Day or Pola Night into the body.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4 x 3g syringes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBULK KIT:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e50 x 1.3g syringes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDirection To Use: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePlace a small drop of gel into every compartment of the tray for the teeth undergoing treatment\u003c\/li\u003e\n\u003cli\u003eSeat the tray, with the gel around the teeth\u003c\/li\u003e\n\u003cli\u003eWipe away excess gel in the mouth with a tissue or dry soft brush\u003c\/li\u003e\n\u003cli\u003eAfter treatment, remove tray. Rinse tray and mouth with lukewarm water\u003c\/li\u003e\n\u003cli\u003eBrush teeth.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"SDI","offers":[{"title":"Bleaching Kit","offer_id":46529275134127,"sku":null,"price":58.55,"currency_code":"USD","in_stock":true},{"title":"22 %","offer_id":46529275166895,"sku":null,"price":58.55,"currency_code":"USD","in_stock":true},{"title":"16% Bulk Kit","offer_id":46529275199663,"sku":null,"price":147.5,"currency_code":"USD","in_stock":true},{"title":"22% Bulk Kit","offer_id":46529275232431,"sku":null,"price":147.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/9755\/3839\/files\/polanight-2_1.webp?v=1769584398"},{"product_id":"d-tech-restore-glass-gic-professional-glass-restoration-services","title":"D-Tech Restore Glass GIC","description":"\u003cp\u003eD Tech Restore Glass is an economical glass ionomer dental restorative cement formulated with advanced calcium-based glass technology. This water-based cement features a composition of polycarboxylic acid and alumina silicate glass, offering aesthetic appeal and stability.\u003c\/p\u003e\n\u003cp\u003eIt is designed to match the coefficient of thermal expansion of natural tooth structure, ensuring reliable performance and comfort. Ideal for various applications, Restore Glass is suitable for the restoration of primary teeth, core build-ups, and Class III, V, and limited Class I cavities. It can also used as a core build up material. \u003c\/p\u003e\n\u003cp\u003eWhile it provides a durable and cost-effective solution, it is contraindicated for pulp capping and may cause sensitivity or adverse reactions in rare cases. The cement’s stability and compatibility make it a versatile choice for effective dental restorations. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHumid Stability:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMaintains effectiveness in humid conditions for consistent performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAesthetic Appeal:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCrafted for natural-looking dental restorations with pleasing aesthetics.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFluoride Release:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eActively promotes dental health by releasing fluoride for decay prevention.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReliability:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEngineered for durable and reliable dental restorations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUser-Friendly:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEasy application for dental professionals, ensuring efficiency.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSuitable for various dental procedures, demonstrating adaptability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Patient Care:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eFocus on stability, aesthetics, and fluoride release for overall patient satisfaction.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKey Specifications: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory\u003c\/strong\u003e: Restorative material\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e: Glass ionomer cement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposition\u003c\/strong\u003e: Powder - Alumina Silicate Glass \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiquid\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Poly carboxylic acid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixing Time:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e30 - 45 seconds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking time:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e2 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetting time:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e4 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShelf Life\u003c\/strong\u003e: 2 years from date of manufacture\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRadiopaque\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x 15gm Powder\u003c\/li\u003e\n\u003cli\u003e1 x 13gm Liquid\u003c\/li\u003e\n\u003cli\u003e1 x Mixing Pad\u003c\/li\u003e\n\u003cli\u003e1 x Spoon \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDirection To Use: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrecautions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePersonal Protective Equipment (PPE):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAlways wear gloves, face masks, and safety eyewear during application.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact with Oral Tissue or Skin:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eIf contact occurs, remove immediately with a sponge or cotton soaked in alcohol, then flush with water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact with Eyes:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eRinse immediately with water and seek medical attention.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensitivity Reactions:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eIn rare cases, the product may cause sensitivity. Discontinue\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"D-Tech","offers":[{"title":"Default Title","offer_id":46554622460079,"sku":null,"price":18.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/9755\/3839\/files\/dtechrestor2.jpg?v=1770738810"},{"product_id":"d-tech-compomax-restorative-kit","title":"D-Tech Compomax Restorative Kit","description":"\u003cp\u003eDtech Compomax is a light-curing Nano Hybrid Composite for anterior and posterior filling of all cavity classes. It is a light-cured resin-based dental restorative material. This system has enhanced color stability; designed to accommodate the ‘Multi-shade layering’ technique. This not only guarantees a natural and highly aesthetic filling but also minimization of polymerization shrinkage. Compomax is used with a dentine enamel bond \u0026amp; is available in the syringe.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eINDICATION FOR USE:-\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnamel layer for class I, II, III, IV, V, VI, restorations\u003c\/li\u003e\n\u003cli\u003eRepairing veneers\u003c\/li\u003e\n\u003cli\u003eSplinting \u0026amp; locking of periodontally involved teeth. Core build-up to replace missing tooth structure.\u003c\/li\u003e\n\u003cli\u003eComposite inlays\u003c\/li\u003e\n\u003cli\u003eFacetting of discolored anterior.\u003c\/li\u003e\n\u003cli\u003eReconstruction of traumatically damaged anterior.\u003c\/li\u003e\n\u003cli\u003eComposite \u0026amp; porcelain repairs.\u003c\/li\u003e\n\u003cli\u003eDiastema closures.\u003c\/li\u003e\n\u003cli\u003eTo mask out the discolored pulpal floor at the base of a preparation (opaque shades).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCONTRAINDICATIONS\u003c\/strong\u003e\u003cbr\u003eThe application of Compomax is contraindicated if drainage or the recommended application technique cannot be achieved. Do not apply directly on open pulp or if there are any known allergies against one of the components\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"sc-892bc00b-0 sc-1d8c424f-0 ixfvBk\"\u003e\n\u003cdiv class=\"sc-eb36be54-0 fMhODl\"\u003e\n\u003cdiv class=\"sc-eb36be54-2 jyBgyM\"\u003e\n\u003cdiv class=\"sc-1d8c424f-1 ivzsTD\"\u003e\n\u003cdiv class=\"sc-892bc00b-0 sc-892bc00b-4 sc-1d8c424f-2 ixfvBk jwFGYK kWlpcO [\u0026amp;_ul]:!list-disc\"\u003e\n\u003cul\u003e\n\u003cli\u003eHigh compressive strength\u003c\/li\u003e\n\u003cli\u003eHigh flexural strength\u003c\/li\u003e\n\u003cli\u003eLow shrinkage\u003c\/li\u003e\n\u003cli\u003eEasy to sculpt\u003c\/li\u003e\n\u003cli\u003eDoes not stick to instrument\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKey Specifications: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cdiv class=\"left\"\u003eHigh Flexural \u0026amp; Compressive Strength\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"left\"\u003eHighly Aesthetic\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003eShelf life :- 2 years\u003c\/li\u003e\n\u003cli\u003ePolymer-based restorative materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eStorage:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDo not store above 25 C. Discharge syringes immediately after use to avoid the material curing from ambient light.  Do not use it after the expiry date.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4 x 4g Light Cured Universal Composite Syringe\u003c\/li\u003e\n\u003cli\u003e1 x 2.5g Etching gel syringe\u003c\/li\u003e\n\u003cli\u003e1 x 5ml Single step 5th generation bonding agent\u003c\/li\u003e\n\u003cli\u003e50 x Fibred Applicator tips\u003c\/li\u003e\n\u003cli\u003e20 x Angled tips\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDirection To Use: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrior to preparation, clean the tooth, and remove all cleaning residues with a water spray. Determine the vita tooth shade. Use a rubber dam where possible.\u003c\/li\u003e\n\u003cli\u003ePrepare the cavity according to the general rules of adhesive technology. Round off enamel edges and protect pulp areas.\u003c\/li\u003e\n\u003cli\u003eEtch as required, according to your preferred technique, e.g. etch plus. Follow the instructions for using the materials used.\u003c\/li\u003e\n\u003cli\u003eApply bond primer. (AQ Bond)\u003c\/li\u003e\n\u003cli\u003eApply a lining of thin-flowing composite (compo Flow) or compomer as required. We recommend using a matrix.\u003c\/li\u003e\n\u003cli\u003eFill the cavity in the required shade in layers of a maximum of 2 mm thickness. Light-cure each layer for 40 seconds.\u003c\/li\u003e\n\u003cli\u003eSurplus removal, contouring, and fine shaping are carried out e.g. With a diamond finisher and flexible discs of decreasing grain size. High-gloss polishing can be carried out with a\u003cbr\u003epolishing paste using polishing cups\/discs.\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"D-Tech","offers":[{"title":"Default Title","offer_id":46554766475439,"sku":"Compomax","price":48.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/9755\/3839\/files\/dtech-compomax-1.jpg?v=1770743180"},{"product_id":"prime-dental-restorite-bulk-fill-kit-flowable","title":"Prime Dental Restorite Bulk Fill Kit (Flowable)","description":"\u003cdiv class=\"sc-892bc00b-0 sc-1d8c424f-0 kiJVAF\"\u003e\n\u003cdiv class=\"sc-eb36be54-0 kMRANI\"\u003e\n\u003cdiv class=\"sc-eb36be54-2 ZftNl\"\u003e\n\u003cdiv class=\"sc-1d8c424f-1 iatDIi\"\u003e\n\u003cdiv class=\"sc-892bc00b-0 sc-892bc00b-4 sc-1d8c424f-2 kiJVAF idhvpr bvXRSb [\u0026amp;_ul]:!list-disc\"\u003e\n\u003cp\u003eThe Prime Dental Restorite Bulk Fill Kit (Flowable) is a comprehensive solution for efficient and esthetically pleasing dental restorations. This kit combines the benefits of a flowable composite with a simplified application process. Engineered for convenience, the flowable composite eliminates the need for additional layers in Class I cavities, saving valuable chair time. With a quick and easy application process, the material is suitable for layers up to 4mm thick, showcasing its versatility. Boasting minimal shrinkage, the kit ensures a safe and reliable application. The high filler content, excellent flow behavior, and easy polishability contribute to its outstanding physical properties, providing practitioners with a reliable tool for successful and aesthetically pleasing restorations.\u003c\/p\u003e\n\u003cdiv class=\"subtitle\"\u003e\u003cstrong\u003eIndications:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul class=\"overview-points\"\u003e\n\u003cli\u003eFillings with layer thicknesses up to 4mm in Black's class I cavities.\u003c\/li\u003e\n\u003cli\u003eBase fillings\/liners with layer thicknesses up to 4mm in Black's class II cavities. For the final layer in a class II cavity only use composites that are suited to filling Black's class II cavities.\u003c\/li\u003e\n\u003cli\u003eCavity lining – as a first (bottom) layer in Black's class I and II cavities.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Shades:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eThe kit includes 3 x 2gm Syringes (Universal Shade) and 1 x 2gm Syringe (Medium Shade), providing versatile options for Class I cavities and color-matched restorations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBonding and Etching Components:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eRestorite Bond 7G (5ml) and Restorite Etching Gel (3ml) facilitate effective bonding and enamel etching, ensuring a secure and durable restoration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlowable Composite Material:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eThe flowable composite material, dispensed from syringes, allows for easy and precise application, eliminating the need for additional layers in Class I cavities.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulk Fill Capability:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eApplication Needles for Restorite Bulk Fill enable the bulk fill technique, accommodating layers up to 4mm thick for efficient and time-saving procedures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRadiopacity for Verification:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eThe flowable composite material provides radiopacity, aiding in clear radiographic verification of the restoration's placement within the tooth structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy Polishing:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eThe flowable composite is easy to polish, facilitating efficient and effective finishing for a smooth and esthetically pleasing surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComprehensive Restorative Solution:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eThe kit offers a complete restorative solution, combining bonding, etching, flowable composite, and additional restorative material for versatile and successful dental procedures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKey Specifications: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposite Type: \u003c\/strong\u003eBulk Fill\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCure Type: \u003c\/strong\u003eLight Cure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShade:\u003c\/strong\u003e Universal and Medium Shade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBiocompatible:\u003c\/strong\u003e 100% free of Bis-GMA, HEMA, and TEG-DMA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth of Cure:\u003c\/strong\u003e 4mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eStorage:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStore in a cool and dry place\u003c\/li\u003e\n\u003cli\u003eStore at room temperature of 5-30°C\u003c\/li\u003e\n\u003cli\u003eDo not freeze\u003c\/li\u003e\n\u003cli\u003eStore away from direct sunlight\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"sc-892bc00b-0 sc-1d8c424f-0 kiJVAF\"\u003e\n\u003cdiv class=\"sc-eb36be54-0 kMRANI\"\u003e\n\u003cdiv class=\"sc-eb36be54-2 ZftNl\"\u003e\n\u003cdiv class=\"sc-1d8c424f-1 iatDIi\"\u003e\n\u003cdiv class=\"sc-892bc00b-0 sc-892bc00b-4 sc-1d8c424f-2 kiJVAF idhvpr bvXRSb [\u0026amp;_ul]:!list-disc\"\u003e\n\u003cul\u003e\n\u003cli\u003e20 x Application Needles For Restorite Flow Viscous\u003c\/li\u003e\n\u003cli\u003e4 x Restorite Flow Viscous (2g)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDirection To Use: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTooth Preparation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBegin with standard tooth preparation procedures, ensuring a clean and isolated working area.\u003c\/li\u003e\n\u003cli\u003eApply an appropriate dental etchant to create microretentive patterns on the tooth surface.\u003c\/li\u003e\n\u003cli\u003eRinse the etchant thoroughly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAdhesive Application:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eApply a dental adhesive or bonding agent following standard procedures.\u003c\/li\u003e\n\u003cli\u003eAllow sufficient time for the bonding agent to interact with the tooth surface.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDispensing:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDispense the bulk-fill flowable composite according to the desired amount for the restoration.\u003c\/li\u003e\n\u003cli\u003eUse a syringe or applicator tip for precise placement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlacement:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePlace the flowable composite into the prepared cavity or onto the tooth surface.\u003c\/li\u003e\n\u003cli\u003eEnsure even coverage and adaptation to the tooth structure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eShaping and Contouring:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUse dental instruments as needed to shape and contour the material.\u003c\/li\u003e\n\u003cli\u003eAchieve the desired anatomical form.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLight-Curing:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLight-cure the composite using a dental curing light.\u003c\/li\u003e\n\u003cli\u003eFollow recommended curing times, ensuring adequate exposure to each section of the restoration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFinishing:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFinish the restoration as needed to achieve a smooth and anatomically accurate surface.\u003c\/li\u003e\n\u003cli\u003eCheck and adjust the occlusion for proper bite alignment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePolishing:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePolish the cured composite for a smooth and esthetically pleasing result.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Prime Dental","offers":[{"title":"Default Title","offer_id":46559373721775,"sku":"PrimeRestoriteBulkKit","price":35.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/9755\/3839\/files\/prime_flowable.jpg?v=1770885366"},{"product_id":"ammdent-cavlaq","title":"Ammdent Cavlaq","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eAmmdent Cavlaq\u003c\/strong\u003e \u003c\/span\u003eis a protective dental cavity varnish that is formulated with copal gum as its primary active ingredient. Copal gum is a natural resin that is extracted from the Copal tree, and has been used for centuries for its therapeutic properties.\u003c\/p\u003e\n\u003cp\u003eWhen applied to the affected area, Cavlaq forms a protective barrier over the exposed dentin, helping to alleviate sensitivity and protect the tooth from further damage. The copal gum in Cavlaq has natural antibacterial and anti-inflammatory properties, which can help to promote healing and reduce the risk of infection. This helps to alleviate the symptoms of thermal sensitivity, which can be a common problem for patients with exposed dentin. One of the benefits of Ammdent Cavlaq is that it does not require a thinner, making it easy and convenient to apply. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"sc-892bc00b-0 sc-1d8c424f-0 kiJVAF\"\u003e\n\u003cdiv class=\"sc-eb36be54-0 kMRANI\"\u003e\n\u003cdiv class=\"sc-eb36be54-2 ZftNl\"\u003e\n\u003cdiv class=\"sc-1d8c424f-1 iatDIi\"\u003e\n\u003cdiv class=\"sc-892bc00b-0 sc-892bc00b-4 sc-1d8c424f-2 kiJVAF idhvpr bvXRSb [\u0026amp;_ul]:!list-disc\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGum-based formula:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAmmdent Cavlaq is made from a gum-based formula that is easy to apply and ensures a smooth and even coverage over the affected area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtects exposed dentin:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe varnish creates a protective layer over the exposed dentin, reducing sensitivity and preventing further damage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlleviates thermal sensitivity:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAmmdent Cavlaq helps to alleviate the symptoms of thermal sensitivity, which can be a common problem for patients with exposed dentin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCavity liner and dentin tubule sealer:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe varnish can be used as both a cavity liner and a dentin tubule sealer, making it a versatile product for use in a range of dental procedures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with restorative materials:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAmmdent Cavlaq is compatible with a range of restorative materials, making it an ideal product for use in various dental procedures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBiocompatible:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAmmdent Cavlaq is biocompatible, meaning it is safe for use in the oral cavity and does not cause any adverse reactions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKey Specifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposition:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAmmdent Cavlaq is a gum-based dental varnish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViscosity:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe varnish has a suitable viscosity that allows it to be easily applied and spread evenly over the affected area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSetting time:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe varnish has a relatively short setting time, which makes it ideal for use as an intermediary varnish prior to the application of restorative materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesion:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAmmdent Cavlaq has good adhesion to the tooth surface, which ensures that it remains in place and provides effective protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"sc-892bc00b-0 sc-1d8c424f-0 kiJVAF\"\u003e\n\u003cdiv class=\"sc-eb36be54-0 kMRANI\"\u003e\n\u003cdiv class=\"sc-eb36be54-2 ZftNl\"\u003e\n\u003cdiv class=\"sc-1d8c424f-1 iatDIi\"\u003e\n\u003cdiv class=\"sc-892bc00b-0 sc-892bc00b-4 sc-1d8c424f-2 kiJVAF idhvpr bvXRSb [\u0026amp;_ul]:!list-disc\"\u003e\n\u003cul\u003e\n\u003cli\u003e1 x 30 ml Bottle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDirection To Use: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrepare the cavity:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eBefore using Ammdent Cavlaq, prepare the cavity according to standard dental procedures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply a small quantity of varnish:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eTake a small cotton pellet and put a small quantity of Ammdent Cavlaq on it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply to inner walls of the cavity:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eApply the varnish to the inner walls of the cavity using the cotton pellet, making sure to cover the entire surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAllow to dry:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAllow the varnish to dry for 40 seconds before proceeding. If necessary, apply another layer of varnish using a new cotton pellet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply two thin layers:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eIt is recommended to apply two thin layers of Ammdent Cavlaq instead of one thick layer. Be sure to use a new cotton pellet for each layer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProceed with restorative procedure:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eOnce the varnish has been applied and allowed to dry, proceed with the restorative procedure as usual.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Ammdent","offers":[{"title":"Default Title","offer_id":46559433097391,"sku":"AmmdentCavlaq","price":21.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/9755\/3839\/files\/ammdent-cavlaq-1.jpg?v=1770886789"},{"product_id":"ammdent-provar-cavity-varnish","title":"Ammdent Provar Cavity Varnish (Pack of 4)","description":"\u003cp\u003e\u003cstrong\u003eAmmdent Provar Cavity Varnish\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis a specialized dental product formulated to provide superior protection for exposed dentine during dental procedures. Crafted with Copal gum, isopropyl alcohol, and select excipients, this varnish offers a reliable barrier against fluid intrusion, ensuring optimal conditions for subsequent dental restorations.\u003c\/p\u003e\n\u003cp\u003eIdeal for cavity lining and dentinal tubule sealing, Provar assures perfect protection for exposed dentine surfaces in teeth prepared for permanent fillings or restorations. It serves as an intermediary varnish, facilitating the insertion of amalgams, cement, or composites. With a recommended application method involving the use of cotton pellets, Provar should be applied in thin layers, allowing approximately 40 seconds for drying between applications. Proper storage away from heat and fire is essential, and prompt sealing of the container after each use helps prevent contamination and solvent evaporation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eINDICATIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUsed during cavity preparation to prevent post op hypersensitivity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"sc-892bc00b-0 sc-1d8c424f-0 kiJVAF\"\u003e\n\u003cdiv class=\"sc-eb36be54-0 kMRANI\"\u003e\n\u003cdiv class=\"sc-eb36be54-2 ZftNl\"\u003e\n\u003cdiv class=\"sc-1d8c424f-1 iatDIi\"\u003e\n\u003cdiv class=\"sc-892bc00b-0 sc-892bc00b-4 sc-1d8c424f-2 kiJVAF idhvpr bvXRSb [\u0026amp;_ul]:!list-disc\"\u003e\n\u003cdiv class=\"flex flex-grow flex-col max-w-full\"\u003e\n\u003cdiv class=\"min-h-[20px] text-message flex flex-col items-start gap-3 whitespace-pre-wrap break-words [.text-message+\u0026amp;]:mt-5 overflow-x-auto\" data-message-author-role=\"assistant\" data-message-id=\"bc1d729a-c41e-4a5d-9911-76307ef01aa9\"\u003e\n\u003cdiv class=\"markdown prose w-full break-words dark:prose-invert light\"\u003e\n\u003cul\u003e\n\u003cli\u003eCopal gum-based protective varnish\u003c\/li\u003e\n\u003cli\u003eReduces fluid penetration into tooth\u003c\/li\u003e\n\u003cli\u003eNo need for thinners\u003c\/li\u003e\n\u003cli\u003eIdeal cavity liner and sealer\u003c\/li\u003e\n\u003cli\u003eAssures perfect dentine surface protection\u003c\/li\u003e\n\u003cli\u003eSuitable before amalgam, cement, or composites\u003c\/li\u003e\n\u003cli\u003eConvenient two-layer application technique\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKey Specifications: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposition:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCopal gum, isopropyl alcohol, excipients\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplications:\u003c\/strong\u003e Cavity lining, dentinal tubule sealing, intermediary varnish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage:\u003c\/strong\u003e Keep away from heat and fire; seal container after use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShelf Life:\u003c\/strong\u003e 3 years under proper storage conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"sc-892bc00b-0 sc-1d8c424f-0 kiJVAF\"\u003e\n\u003cdiv class=\"sc-eb36be54-0 kMRANI\"\u003e\n\u003cdiv class=\"sc-eb36be54-2 ZftNl\"\u003e\n\u003cdiv class=\"sc-1d8c424f-1 iatDIi\"\u003e\n\u003cdiv class=\"sc-892bc00b-0 sc-892bc00b-4 sc-1d8c424f-2 kiJVAF idhvpr bvXRSb [\u0026amp;_ul]:!list-disc\"\u003e\n\u003cul\u003e\n\u003cli\u003e1 x 30mL Bottle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDirection To Use: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePreparation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBegin by preparing the dental cavity according to standard procedures recommended for the specific dental restoration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTake a small quantity of Ammdent Provar Cavity Varnish on a clean cotton pellet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplying the Varnish:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGently apply the varnish onto the inner walls of the prepared dental cavity using the cotton pellet. Ensure thorough coverage of the exposed dentine surface.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDrying Time:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAllow the applied varnish to air dry for approximately 40 seconds. This drying period facilitates the formation of a protective barrier.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eReapplication (If Necessary):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIf deemed necessary for comprehensive coverage, repeat the application process to apply a second thin layer of varnish. Use a new cotton pellet for each application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLayering Technique:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor optimal results, it is recommended to apply two thin layers of varnish instead of a single thick layer. This ensures effective protection and adherence to the dentine surface.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eStorage:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStore the container of Ammdent Provar Cavity Varnish in a cool, dry place away from sources of heat and fire.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eContainer Closure:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAlways ensure to promptly close the lid tightly after each use to prevent contamination and minimize solvent evaporation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCaution:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExercise caution during handling and application, as the varnish is volatile and inflammable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eShelf Life:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe shelf life of Ammdent Provar Cavity Varnish is 3 years under proper storage conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Ammdent","offers":[{"title":"Default Title","offer_id":46559434604719,"sku":"AmmdentProvar","price":25.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/9755\/3839\/files\/ammdent_provar.jpg?v=1770887399"},{"product_id":"coltene-paracore-kit-60013753","title":"COLTENE ParaCore Kit 60013753 – Dual-Cure Core Build-Up Composite \u0026 Post Cement System","description":"\u003cdiv class=\"sc-892bc00b-0 sc-1d8c424f-0 cymOrW\"\u003e\n\u003cdiv class=\"sc-eb36be54-0 jrfDqn\"\u003e\n\u003cdiv class=\"sc-eb36be54-2 fPHBZi\"\u003e\n\u003cdiv class=\"sc-1d8c424f-1 haNrmt\"\u003e\n\u003cdiv class=\"sc-892bc00b-0 sc-892bc00b-4 sc-1d8c424f-2 cymOrW kwxfio izBlDE [\u0026amp;_ul]:!list-disc\"\u003e\n\u003ch4\u003eOverview of ParaCore Slow Intro Kit for Core Build-Up Materials\u003c\/h4\u003e\n\u003cp\u003eThe \u003cstrong\u003eParaCore Slow Intro Kit\u003c\/strong\u003e is a state-of-the-art dental product designed specifically for core build-up materials. This kit is also widely used for cementing root posts and indirect restorations. It is a dual-cured, composite-based, and radiopaque material that delivers reliable results. Dental professionals trust this kit for reconstructing teeth that require a hard core foundation.\u003c\/p\u003e\n\u003cp\u003eWhen applied in core build-up tasks, the kit effectively restores severely damaged teeth. It provides excellent mechanical strength to support crowns and bridges. The composition includes materials like methacrylates, fluoride, barium glass, and amorphous silica. These ingredients ensure durability and radiographic visibility in dental procedures.\u003c\/p\u003e\n\u003ch4\u003eAdhesion and Durability of Core Build-Up Materials\u003c\/h4\u003e\n\u003cp\u003eReliable adhesion and long-term stability are key features of this product. The ParaCore Slow Intro Kit guarantees a strong bond between the root canal post and the dental structure. This bond supports the longevity and success of the restoration. The enhanced adhesion is achieved through ParaBond, a chemical-curing adhesive system. ParaBond significantly improves connection strength between tooth and post for optimal durability.\u003c\/p\u003e\n\u003cp\u003eBesides core build-up materials, this product acts as an efficient cementing agent for indirect restorations. It is highly compatible with different restoration types such as crowns, bridges, inlays, and onlays. It bonds seamlessly with restorations made of ceramic, metal, or composite. Its outstanding adhesive properties suit multiple clinical applications that demand high performance.\u003c\/p\u003e\n\u003ch4\u003eWorking Conditions and Handling of ParaCore Slow Intro Kit\u003c\/h4\u003e\n\u003cp\u003eThe working and setting times of this kit vary depending on the ambient temperature. Higher temperatures reduce working time and require careful temperature control. Maintaining a dry working field is essential to achieve best results. The material must be shielded from strong light exposure prior to polymerization. The curing duration depends on the intensity of the light source, with stronger lamps cutting curing time effectively.\u003c\/p\u003e\n\u003cp\u003eHandling the ParaCore Slow Intro Kit is user-friendly thanks to its time-activated polymer formula. This ensures precise placement and excellent manipulation during application. The material has a creamy, smooth, and non-slumping consistency. These features allow dental practitioners to maintain full control and reduce mess during procedures, improving efficiency.\u003c\/p\u003e\n\u003ch4\u003eFeatures of ParaCore Slow Intro Kit as Core Build-Up Materials\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eTime-activated polymer formula designed for ideal handling and placement accuracy.\u003c\/li\u003e\n\u003cli\u003eDurable and long-lasting restorations with outstanding bond strength.\u003c\/li\u003e\n\u003cli\u003eSuperior adhesion guarantees restoration longevity and reliability.\u003c\/li\u003e\n\u003cli\u003eStable, smooth, creamy, and non-slumping consistency for effortless application.\u003c\/li\u003e\n\u003cli\u003eFluoride release promotes dental health and helps prevent decay.\u003c\/li\u003e\n\u003cli\u003eRadiopaque composition allows easy monitoring through radiographs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eKey Specifications of the Materials\u003c\/h4\u003e\n\u003cp\u003eThe ParaCore Slow Intro Kit contains critical materials such as methacrylates, fluoride, barium glass, and amorphous silica. These ingredients provide the material with its robustness and radiographic properties. Below is a table summarizing the key specifications observed at room and intraoral temperatures:\u003c\/p\u003e\n\u003ctable width=\"458\" border=\"1\" cellpadding=\"5\" cellspacing=\"0\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eRoom Temperature\u003c\/th\u003e\n\u003cth\u003eIntraoral Temperature\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature\u003c\/td\u003e\n\u003ctd\u003e23 °C \/ 73 °F\u003c\/td\u003e\n\u003ctd\u003e37 °C \/ 99 °F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking Time\u003c\/td\u003e\n\u003ctd\u003eca. 160 s\u003c\/td\u003e\n\u003ctd\u003eca. 60 s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSetting Time\u003c\/td\u003e\n\u003ctd\u003eca. 330 s\u003c\/td\u003e\n\u003ctd\u003eca. 200 s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003ePackaging Details for Core Build-Up Materials\u003c\/h4\u003e\n\u003cp\u003eThe kit contains a variety of components to satisfy multiple clinical needs. The packaging includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 × 5 ml ParaCore Dentin SLOW\u003c\/li\u003e\n\u003cli\u003e2 × 5 ml ParaCore Trans SLOW\u003c\/li\u003e\n\u003cli\u003e3 × 3 ml ParaBond Non-Rinse\u003c\/li\u003e\n\u003cli\u003eConditioner + Adhesive A \u0026amp; B\u003c\/li\u003e\n\u003cli\u003e20 × Mixing Tip Short Super Fine\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eDirections for Use of the Hard Core Materials\u003c\/h4\u003e\n\u003cp\u003eCorrect tooth isolation is critical to attaining optimal bonding and restoration success. The working field must remain dry throughout the entire procedure. We highly recommend using a rubber dam for isolation. An example is the Waldent Rubber Dam Kit of 21 (K16\/2), which ensures effective isolation of the tooth.\u003c\/p\u003e\n\u003cp\u003eStrict adherence to isolation and curing instructions will maximize results. Protecting the material from moisture and using proper polymer curing methods are essential steps for long-lasting restorations. These materials set the standard for core build-up materials in restorative dentistry.  \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Coltene","offers":[{"title":"Default Title","offer_id":46586823770287,"sku":"ColteneParaCoreKit","price":167.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/9755\/3839\/files\/agreth.jpg?v=1775846807"}],"url":"https:\/\/dentistrydeal.com\/collections\/dental-restoratives.oembed?page=2","provider":"Dentistry Deal","version":"1.0","type":"link"}