Speedex offers physical properties that approximate those of addition cured silicones – polyvinylsiloxanes, a reliable dental impression material.
Speedex provides elastic recoverability and reproduction otherwise only achieved by A-Silicones. Its low shrinkage keeps impressions dimensionally stable and castable for up to 7 days. Furthermore, this premium C-Silicone shows outstanding wettability and excellent flow characteristics.
The Speedex system allows working with only one activator for 3 consistencies.
Speedex light body offers outstanding wettability and excellent flow characteristics. Saliva and blood are displaced by Speedex light without negative side effects. With variable setting times, mucosal movements essential for full and partial denture techniques can be captured precisely. A precision impression is key for a well-fitting denture. Speedex Light Body matches physical properties of addition cured silicones – polyvinylsiloxanes. Haemostatic or anaesthetic substances do not affect setting. Handling with latex gloves is unproblematic.
Features:
- 7 days dimension stability
- Controllable working times
- Surface active
- Moisture control
- Optimized precision
- Superior detail
- Excellent flow behaviours
- Haemostatic or anaesthetic substances do not influence the setting process.
- Handling with latex gloves is also uncritical.
Key Specifications:
Composition :-
Speedex putty - Polysiloxane & Peppermint oil
Speedex light body - Polysiloxane
Speedex Universal Activator - Polysiloxane-based activator
Colour :-
Speedex putty - light grey
Speedex light body - dark blue
Speedex Universal Activator - green
Speedex Light Body - Dental impression material :
-
Mixing time: 00:30 min
-
Working time: ≤1:30 min
-
Oral setting time: 3:00 min
-
Mixing ratio Light body /Activator: 5 ml/1 ml or 5 g/0.88 g
Speedex Putty :
-
Mixing time: 00:30 min
-
Processing time ≤1:15 min
-
Oral setting time: 3:00 min
-
Mixing ratio Putty /Activator: 24 ml/1 ml or 5.50 g/0.15 g
Shelf life and storage
-
Storage temperature: 15-23°C / 59-73°F
-
Relative humidity: 50% ± 10%
-
Shelf life after first opening: 3 months
Packaging:
- 1 x Putty (910 ml)
- 1 x Light body (140 ml)
- 1 x Activator (60 ml)
Direction To Use:
Speedex Putty :
- Spread out the Speedex putty material in the palm of your hand.
- Apply one strand length of Speedex Universal Activator per circle diameter.
- Fold material and knead with fingers until a completely homogeneous colour is attained. Mix for at least 30-45 seconds.
- Insert the impression tray, loaded with dental impression material, into the oral cavity. Press for 2-3 seconds and hold until fully set.
Speedex Light Body :
Dosage :
- Dispense Speedex Universal Activator and Speedex light body on a mixing block in two equal strands.
- Ensure tubes are closed immediately after use.
- Intensive mixing, high temperatures, and humidity accelerate curing.
- Low temperatures slow curing.
- Adjusting Speedex Universal Activator dosage controls processing time.
Mixing :
- Take one component (Universal Activator or light body) with spatula and spread it evenly on the other component.
- Then pick both components with the spatula and spread out on the mixing block.
- Repeat until the mixture is homogeneous. Observe specified processing times.
Impression :
- Apply dental impression material in the patient’s mouth or to the impression tray based on the method.
- Insert the tray into the oral cavity. Press for 2-3 seconds and hold it there until set completely.
Pouring of models :
- The ideal pouring time lies between 30 minutes and 72 hours after impression taking.
- Briefly wash the impression with detergent and rinse thoroughly in lukewarm water before pouring.
- All standard dental stone model materials can be used successfully.
Speedex dental impression material's advanced properties ensure precision impressions. Suitable for restoring dental implants and procedures at any dental clinic, this material performs reliably. It combines ease of use with optimal dimensional stability, making it ideal for dental professionals.
