Ivoclar Te-Econom Flow Composite

Preparation:

• Ensure a clean and well-lit workspace.
• Select the appropriate shade for the restoration.

Isolation:

• Use tools like a rubber dam or OptraDam Plus to isolate the treatment area. This prevents contamination and provides a dry field.

Cavity Preparation:

• Prepare the cavity following the requirements of the adhesive technique.

Cleaning and Drying:

• Clean the cavity with a water spray.
• Air dry the cavity to ensure it's free from moisture.

Optional Pulp Protection:

• Apply a pulp protector (e.g., calcium hydroxide) if needed.
• Follow with a pressure-resistant cement if required.

Matrix and Wedge Placement:

• Position a matrix (e.g., OptraMatrix) for proper tooth contour.
• Add an interdental wedge if necessary.

Etching and Bonding:

• Apply an etchant (e.g., Eco-Etch) to enamel and dentin as indicated.
• Rinse and dry the surfaces, but avoid overdrying the dentin.
• Apply a dental bonding agent (e.g., Te-Econom Bond) to enamel and dentin. Ensure complete coverage.
• Evaporate any remaining solvent and light cure the adhesive as per recommendations.

Composite Placement:

• Apply the flowable composite (e.g., Te-Econom Flow) in thin layers of a maximum of 2mm.
• Light cure each layer individually, following the recommended curing times.

Finishing and Polishing:

• After composite placement, finish the restoration using suitable instruments or fine diamonds.
• Check the occlusion.
• Polish the restoration with silicone polishers for a smooth and aesthetic finish.

Final Assessment:

• Inspect the completed restoration for any adjustments or refinements.