Waldent NanoFlow Bulk Fill Flowable Composite

• Utilizes advanced light-curing technology to ensure efficient and reliable setting, providing strong and durable restorations.
• Designed to be highly radiopaque, allowing for clear visibility on X-rays, which aids in monitoring and assessment of the restoration.
• Incorporates nano-hybrid technology for enhanced strength and durability, combining nanoparticles with traditional fillers to improve overall performance.
• Contains a high filler loading of 70% w/w, contributing to its excellent physical and mechanical properties, including high strength and resistance to wear.
• Features low polymerization shrinkage, minimizing gaps and potential issues with the integrity of the restoration.
• Provides robust physical and mechanical characteristics, ensuring long-lasting performance and resistance to wear and tear.
• Offers high wettability for optimum adhesion to tooth structures, facilitating better bonding and reducing the risk of gaps or failure. 

Key Specifications:

• Category: Dental composite
• Type: Flowable composite 
• Usage: Bulk filling material for posterior teeth
• Composition: Silanated Barium Glass Powder (70% Inorganic Filler)
  • Amorphous Fumed Silica
  • Bisphenol A Glycidyl Methacrylate
  • Ethoxylated Bisphenol A Dimethacrylate
  • Urethane Dimethacrylate
  • Triethylene Glycol Dimethacrylate 
• Curing Time: 40-50 seconds for 3-4mm thick 

Packaging: 

• 1 x 2gm syringe Waldent NanoFlow Bulk Fill Flowable Composite
• 1 x Instruction Manual
• 4 x Dispensing tips

Direction To Use: 

• Isolation: Use a rubber dam to isolate the tooth and ensure a clean working environment.
• Cavity Preparation: Prepare the cavity with minimal tooth reduction to preserve healthy tooth structure.
• Etching: Apply Waldent BestEtch or any 37% phosphoric acid-containing etchant to the enamel and dentin surfaces.
  • Etch for 15-30 seconds depending on the surface being treated.
  • Rinse thoroughly with water for 15 seconds.
• Drying: Dry the surface with clean, oil-free air. Avoid desiccating the dentin.Ensure that the etched surface remains uncontaminated by saliva or blood.
• Application of Adhesive: Apply 2-3 consecutive coats of Waldent NanoBond Nano-Hybrid Dental Flowable Restorative Material or a similar adhesive to the etched enamel and dentin.
  • Use an applicator for 15 seconds with gentle agitation.
  • Remove excess solvent by gently drying with dry air for at least 5 seconds, achieving a uniform glossy surface.
• Light Curing: Light cure the adhesive for 20-30 seconds.
• Applying NanoFlow Bulk Fill Flowable Composite: Apply the NanoBulk directly into the cavity using the applicator tip. Ensure the layer does not exceed 3-4mm in thickness.
• Final Curing: Light cure the NanoBulk for 40 seconds using a standard curing light, such as the Waldent Eco Plus Light Curing Unit.